Description
Form smooth compound curves, safety handrails, and mower deck bumper guards without flat-spotting tubular profiles. The JET Er-2 Electric Pinch Roll bender rolls round pipe up to 2 inches in diameter. This motorized three-roll machine features forward and reverse foot pedals. It requires solid floor anchoring to handle long pipe lengths safely.
Heavy plate steel forms the welded machine frame, eliminating side deflection under heavy mechanical pinch loads. A 1.5 HP electric motor drives the two bottom rolls through case-hardened reduction gears, maintaining smooth material feed without surface slip. The manual top roll adjusts downward via a precision ACME lead screw with a reference scale. Forward and reverse foot pedal controls keep the operator hands free to support long pipe lengths.
Key Features of JET 754435
Commercial equipment fabricators use this pinch roll bender to roll roll-over protection bars and mower deck tubular guards. The foot pedals simplify rolling sweeping circular arches.
- 2-inch schedule 40 pipe bending capacity rolls heavy structural tubing into circular curves
- 1.5 HP electric motor delivers high rotational torque through reduction drive gears
- Forward and reverse foot pedal controls leave operator hands free to guide pipe stock
- Heavy-duty welded steel plate frame eliminates mechanical deflection under high bending pressure
- Precision manual top roll adjustment screw features a reference scale for repeatable bends
- Two driven lower rolls maintain positive material traction without pipe slip
- Includes standard roll set configured for bending flat bar and square structural tubing
Electric Pipe Roll Dynamometer Telemetry
Bending load tests verify consistent rolling of 2-inch schedule 40 carbon steel pipe at 9 RPM roll speed. Motor current draw measures 7.2 amps on 230V single-phase power under maximum pinch pressure. Top roll lead screw downforce reaches 6500 lbs during tight radius bending without frame twist. Drive roll runout measures under 0.0015 inches across the shaft face. Acoustic noise levels register 68 dBA.
Bending Bay Setup Safety Guardrails
Bolt the heavy machine base securely to a reinforced concrete floor slab before bending structural pipe. Feed material straight between the rolls and verify that bystanders remain clear of sweeping pipe ends. Never place hands on the drive roll face or pinch zone while pressing foot controls.
- Drive gear reduction box requires ISO 220 industrial gear oil checks every six months
- Top roll ACME adjustment screw demands high-pressure lithium grease application monthly
- Lower roll drive shaft bearings require grease gun lubrication via grease zerks weekly
JET Roll Bender Warranty Manifest
JET covers this electric pinch roll bender with a 1-Year commercial warranty against manufacturing and mechanical defects. The shipment includes the Er-2 roll bender, foot pedal control assembly, standard roll tooling, and manual.
