Description
Raise jobsite materials with JET SkyHyker 25 Ft. Jobsite lift reach when contractors need heavy capacity through standard doorways. Experienced construction crews gain 2,000-lb lifting capacity below 20 feet and 1,500 lbs above 20 feet with guy wires, but can the mast remain stable when telescoping or lifting at full extension? Its three-section telescoping mast, dual worm-gear winches, self-latching hook, locking casters, and engineered rigging points support controlled material elevation.
Model JT1-595 lists a 25-foot maximum lift, 1,000-lb telescoping capacity, 2,000-lb lifting capacity under 20 feet, and 1,500-lb capacity above 20 feet when guy wires are used. The unit weighs approximately 810 lbs assembled, fits through a standard doorway, and uses a three-section mast with dual variable-speed winches. Published specifications identify 6-inch locking casters, a 5/16-inch load cable, and a 2-Year Warranty.
Features of JET SkyHyker
HVAC installers, electrical contractors, steel fabricators, and commercial construction crews need a mobile jobsite lift for duct, fixtures, equipment, and structural components. Trained operators can use SkyHyker after checking mast height, guy-wire requirements, winch operation, hook engagement, load balance, and capacity by lift position.
- 2,000-lb capacity applies to lifting below 20 feet.
- 1,500-lb capacity applies above 20 feet when guy wires are used.
- 1,000-lb telescoping capacity supports mast extension and jack-lifting operations.
- 25-foot lift reaches elevated HVAC and construction installation points.
- Dual worm-gear winches support controlled lifting and lowering.
- Self-latching safety hook helps retain compatible load connections.
- Three-section telescoping mast supports staged height adjustment.
- Six-inch locking casters support jobsite movement and positioning.
Load Test Mast Control
No independent proof-load result, mast-deflection measurement, winch-force telemetry, cable certification, guy-wire test, or field stability report was supplied. Do not treat 2,000 lbs as a universal capacity at every height. Telescoping position, guy-wire use, uneven ground, side loading, wind, poor hook engagement, and unbalanced material can alter stability and load control.
Jobsite Limits Service
The telescoping mast, worm-gear winches, self-latching hook, locking casters, engineered rigging points, and height-based capacity support controlled material elevation. This jobsite lift is not verified for personnel lifting, unsupported loads above the listed height limits, high-wind operation, or operation without required guy wires.
- Inspect mast sections, winches, cables, hook latch, casters, rigging points, and guy wires.
- Confirm capacity for the actual height, load position, mast extension, and site conditions.
- Set the legs and locks securely, then remove the lift after cable or mast damage.
Warranty Compliance Contents
JET product information lists a 2-Year Warranty for model JT1-595. Package contents should be confirmed because available data identifies the SkyHyker lift without a complete accessory manifest. Verify current warranty terms, mast sections, winches, cables, guy wires, hook, casters, operating manual, and installation documentation before commercial use.
