Description
Raise zero-turn mower decks, transmissions, and heavy diesel engines up to comfortable workbench working heights. The JET SLT-330F Scissor Lift Table provides 330 lbs of hydraulic elevation capacity up to 29 inches high. This mobile scissor cart reduces mechanic back strain. The unit requires flat shop floors to roll smoothly under elevated loads.
All-steel scissor arms combine with a formed 10-gauge steel tabletop to stop platform sag during mechanical teardowns. A foot-actuated hydraulic pump pedal raises the table deck with minimal leg effort. The chrome-plated hydraulic cylinder incorporates an internal overload bypass valve to prevent mechanical damage. Four polyurethane swivel casters include two total-lock foot brakes, keeping the work platform stationary during aggressive torque wrench operations.
Key Features of JET JT9-140771
Mower repair technicians use this hydraulic lift cart to service commercial spindle assemblies and hydro transmissions. The hydraulic foot pedal raises parts straight to workbench level.
- 330 lb hydraulic lift capacity supports commercial zero-turn mower decks and engines
- Maximum lift height of 29 inches aligns heavy components flush with shop workbenches
- Hydraulic foot pump raises the steel table deck smoothly without manual back strain
- Quick-release hand lever controls table descent speed for precise machinery alignment
- Non-marking polyurethane casters protect finished concrete shop floors from tire scratches
- Dual rear wheel foot brakes lock both wheel roll and swivel rotation during bench work
- Fold-flat steel handle assembly permits compact storage beneath shop shelving racks
Hydraulic Scissor Lift Stand Telemetry
Hydraulic test fixtures record 2100 PSI inside the lift ram under a full 330 lb platform load test. Static holding tests verify zero table height drop over a twelve-hour test period. Foot pedal input effort requires 28 lbs of downforce to raise the table at maximum rated capacity. Descent speed controls adjust lowering time between 3 seconds and 20 seconds. Platform lateral deflection measures less than 0.040 inches under full elevation side loads.
Service Bay Setup Limits Safety Directives
Step on the foot brake pedals to lock both rear casters before transferring heavy equipment onto the platform. Center the load over the scissor arms to avoid uneven side forces on the roller tracks. Never operate this lift table as a mobile transport cart while the platform remains fully elevated.
- Scissor arm pivot pins require drops of SAE 30 oil every 30 days
- Hydraulic cylinder seals require wipe-downs to remove grinding dust and fluid spills
- Caster wheel bearings demand periodic solvent cleaning to eliminate trapped grass fibers
JET Scissor Table Commercial Warranty Terms
JET covers this hydraulic lift table with a 1-Year commercial warranty against material defects and seal failures. The shipping carton contains the scissor lift cart assembly, pump foot pedal, handle hardware, and operating manual.
