Description
Tangled extension cords across wet shop floors invite electrical shock hazards and trip technicians during fleet repairs. The Reelcraft Duplex Outlet Box with GFCI power cord reel provides 50 feet of 12-gauge electrical cable at 15 Amps. It protects power tools against ground faults. Cable insulation shreds if dragged across sharp metal chassis edges.
Reelcraft fabricates the structural frame and side flanges from heavy-gauge carbon steel finished with an industrial powder coat. The electrical circuit features a copper slip-ring collector hub that transfers 120-Volt electrical current without sparking or intermittent contact. A heavy-duty tempered steel mainspring inside an enclosed canister provides constant recoil torque. The terminal end features a cast aluminum duplex outlet box equipped with a 20-Amp ground fault circuit interrupter receptacle.
Field Hardware Performance Matrix
Equipment wash bays and damp fleet repair stalls require ground fault protected electrical power without loose cords on wet floors. Heavy-gauge steel construction and industrial copper slip rings provide dependable electrical power delivery to mobile service tools.
- 50-foot 12/3 SJTOW oil-resistant and water-resistant electrical cord provides 15-Amp continuous power delivery.
- Integrated GFCI duplex receptacle shuts down power within 25 milliseconds upon sensing ground current leaks.
- Copper collector ring unit with copper-graphite brushes transfers electric current without arcing during spool rotation.
- Cast aluminum outlet junction box protects electrical receptacles from accidental vehicle crush damage.
- Enclosed drive spring canister shields the tempered steel spring from shop moisture and airborne metal dust.
- Multi-position locking ratchet mechanism holds the power cord at desired payout lengths to eliminate cable drag.
- Four-roller non-snag fairlead guides the electrical cord onto the drum without pinching or chafing cable insulation.
Dyno Load Realities Heat Data
Under full 15-Amp continuous load testing with magnetic drill presses, cable core temperature rises to 124°F when coiled on the drum in 75°F shop air. Spooling out the full 50-foot length drops operating core temperature to 94°F. Pull-force testing measures 6.0 pounds of initial extraction resistance, climbing to 12.5 pounds at full payout. The copper slip ring shows zero electrical voltage drop across 8000 full-cycle rotations. Retraction sound output registers 61 dBA at 3 feet distance.
Field Service Application Limits
Weighing 33 pounds, mounting this power reel overhead requires four 5/16-inch grade 5 bolts into structural steel framing. Do not submerge the aluminum GFCI box in wash basins or use this cord reel on 240-Volt circuits. Exceeding 120 Volts destroys the internal GFCI sensing circuitry and creates catastrophic electrical fire hazards.
- Test the GFCI outlet test and reset buttons every month to verify ground fault protection.
- Inspect the outer SJTOW cable jacket for copper exposure or deep cuts before starting work shifts.
- Check frame mounting bolts for tightness every 250 operating hours to counter line vibration.
Commercial Warranty Package Inventory
Reelcraft protects this industrial power cord reel with a 1-Year commercial warranty covering material defects and factory workmanship. The packaging contains the complete steel cord reel, 50 feet of installed 12/3 SJTOW cord, a cast aluminum GFCI duplex box, an adjustable rubber ball stop, and an instructional wiring manual.