Description
Rough commercial jobs break fragile adjustable wands and tear misadjusted backpack straps. The ProTeam GoFit 6 PLUS 107706 backpack vacuum tackles heavy cleaning abuse by uniting an indexed quick-fit harness with a rigid two-piece aluminum wand kit. It pulls 153 CFM airflow and 91 inches of static water lift. Sucking wet plumbing overflow will ruin the dry motor.
Canister housing consists of high-density polyethylene polymer engineered to absorb direct collisions with metal carts. Inside the base, an 8.5 Amp flow-through motor spins on sealed dual ball bearings protected from fine silica dust. Stamped alloy impellers produce high static suction across multi-level filtration barriers. Integrated cooling channels route ambient air across electrical motor windings to prevent thermal degradation, exhausting warm air downward through acoustic baffles that minimize operating sound.
Hardware Matrix Operational Specs
The PLUS harness platform provides numbered strap settings for quick custom fitting across multi-shift janitorial teams. A two-piece aluminum wand eliminates telescoping slip rings, providing a rigid connection during hard floor scrubbing.
- 6-quart intercept paper filter bag contains fine dust debris without tearing under high suction.
- Indexed quick-adjust harness system lets operators reproduce custom torso fits across shifts.
- 56-inch two-piece aluminum wand provides unyielding rigidity during aggressive floor scrubbing.
- 14-inch Xover multi-surface tool glides between hard surfaces and commercial carpet without shoe swaps.
- 50-foot safety-yellow power extension cord delivers continuous 120-volt current without breaker trips.
- 4-level filtration circuit captures 99.97 percent of dust particles down to 0.3 microns.
- 1.5-inch flexible crush-proof hose resists kink formation under sharp directional turns.
Dyno Thermal Bench Benchmarks
Electrical testing meters confirm an 8.5 Amp continuous draw on a standard 120-volt branch circuit. The flow-through motor turns at 22350 RPM under normal operational vacuum restriction. Motor housing surface temperature increases 48 degrees Fahrenheit over ambient room baseline during a 90-minute sustained bench test. Static vacuum suction holds at 91 inches of water lift on clean filters, dropping to 79 inches when full. Sound output registers 67 dBA at operator ear level. Built-in thermal protection switches trip at 205 degrees Fahrenheit during severe airflow blockages.
Field Maintenance Trade Offs
The two-piece wand cannot adjust to fit shorter operators without changing out wand components. Do not deploy this vacuum for cleaning standing water puddles or damp carpet shampoo residue because moisture ruins motor windings. The 6-quart capacity requires frequent emptying when cleaning large event halls.
- Separate wand friction joints every week to wipe out abrasive dirt buildup.
- Shake out the micro cloth filter bag after sweeping fine drywall or masonry dust.
- Inspect the cord plug ground prong before every shift to ensure electrical ground safety.
Factory Warranty Unboxing Manifest
ProTeam covers the vacuum motor with a 3-Year commercial warranty and includes a lifetime guarantee on molded housing parts. The box contains the 6-quart PLUS vacuum unit, two-piece wand, 14-inch Xover tool, 17-inch crevice tool, 3-inch dust brush, 5-inch upholstery tool, 50-foot cord, and two filter bags.