Description
IT technicians damage expensive circuit boards when using standard plastic shop vacs that generate static charges. The MetroVac MDV-1ESD Datavac Pro Series vacuum eliminates electrostatic discharge through an all-steel grounded chassis and conductive anti-static attachments. It delivers 65 CFM airflow and 60 inches of water lift. Sucking liquid into the motor will cause short circuits.
The body uses stamped 20-gauge carbon steel finished in conductive powder coat that dissipates electrostatic charges through the electrical ground wire. Inside, a 500-watt 0.75-horsepower commercial motor operates on precision ball bearings balanced to reduce vibration during bench use. A high-velocity suction fan draws air through a sealed anti-static filter bag. Integrated cooling channels route ambient air across electrical windings, venting warm air through perimeter louvers to keep the steel housing comfortable to hold.
Hardware Matrix Operational Specs
Conductive anti-static construction drains static electricity to building ground, protecting sensitive microchips from electrostatic discharge. The dual-function design converts from a suction vacuum to a high-pressure air blower with one hose switch.
- 500-watt commercial motor delivers 65 CFM airflow for precise clean-room electronics extraction.
- Conductive all-steel chassis and grounded wiring bleed static charges straight away from delicate circuits.
- Anti-static conductive hose and micro attachments eliminate static generation during component detailing.
- Integrated blower port converts motor exhaust into a high-pressure duster for heatsink crevices.
- Disposable micro-filtration paper bags capture toner dust down to 0.3 microns.
- Grounding wrist strap connects technicians to the metal vacuum chassis to equalize electrical potential.
- 12-foot heavy-duty 3-conductor grounded power cord provides reliable electrical ground contact.
Dyno Thermal Bench Benchmarks
Benchtop power meters record a 4.2 Amp continuous draw on a 120-volt power feed under full tool restriction. Motor velocity tops out at 24000 RPM in open suction mode. Steel canister surface temperatures rise 38 degrees Fahrenheit over ambient room baseline during a 45-minute continuous run. Static suction lift holds at 60 inches of water lift on clean bags, dropping to 50 inches when filled. Sound meters register 72 dBA at 3 feet from the steel canister. Built-in thermal limiters trip at 205 degrees Fahrenheit during air blockages.
Field Maintenance Trade Offs
The compact steel canister lacks capacity for large floor sweeping assignments, limiting this unit to electronics, server racks, and clean-room workbenches. Never use this machine for wet extraction or post-construction drywall cleanup because moisture will short the unsealed motor and fine plaster ruins the paper filter. The steel shell gets warm during prolonged use.
- Inspect the 3-prong grounded power plug before connecting to sensitive electronic workstations.
- Replace the paper filter bag when fine toner dust reaches two-thirds capacity to protect airflow.
- Wipe the steel canister body with a clean dry cloth to prevent conductive grit buildup.
Factory Warranty Unboxing Manifest
MetroVac covers the Datavac Pro Series ESD with a 5-Year commercial motor warranty and a 1-Year warranty on parts. The package contains the anti-static steel vacuum, conductive hose, grounded wrist strap, micro attachments, crevice tool, dusting brush, shoulder strap, blower nozzle, 12-foot cord, and five disposable filter bags.