Description
Abatement contractors face severe regulatory penalties if vacuum exhaust leaks toxic lead or asbestos dust back into containment areas. The Atrix ATIAHV D4.6 4.6 Gallon hazardous particulate vacuum stops toxic bypass through certified HEPA filtration and sealed canister construction. It pulls 102 CFM airflow and 90 inches of water lift. Ingesting wet chemical sludge will ruin the motor.
The canister drum incorporates heavy-duty rotational-molded polymers that withstand corrosive chemical washes and drops from scaffolding platforms. Suction power generates from a 1000-watt commercial bypass motor spinning on sealed precision ball bearings. A certified HEPA filtration module sits in a sealed gasketed housing to prevent dirty air bypass around filter rims. Fresh air routes through secondary thermal channels to cool internal motor windings, expelling warm air outward through acoustic baffles.
Hardware Matrix Operational Specs
Certified containment hardware stops toxic lead, silica, and asbestos dust from escaping into ambient workspaces during remediation jobs. Sealed mechanical latches compress silicone gaskets to preserve negative pressure across all filtration stages.
- 4.6-gallon collection drum contains hazardous dry particulate without wall puncture risks.
- 1000-watt commercial bypass motor isolates toxic particulate streams from motor windings.
- Certified HEPA filtration module captures 99.97 percent of hazardous particles down to 0.3 microns.
- Positive compression drum latches clamp the motor head tight against silicone rim seals.
- 4-wheel castor cart provides balanced rolling transit across rough abatement floor coverings.
- 10-foot static-dissipating suction hose prevents electrical sparking in dry remediation zones.
- Complete remediation tool kit includes chrome wands, floor tool, crevice tool, and dusting brush.
Dyno Thermal Bench Benchmarks
A calibrated power console registers an 8.4 Amp continuous draw on a standard 120-volt test line. Motor fan velocity stabilizes at 21500 RPM under operational floor tool drag. Sump casing surface temperatures rise 44 degrees Fahrenheit over ambient room baseline during a 90-minute continuous run. Static vacuum lift pulls 90 inches on clean filters, dropping to 76 inches when pores load with fine silica. Sound pressure measures 70 dBA at technician ear height. High-limit thermal switches trip at 205 degrees Fahrenheit during blockages.
Field Maintenance Trade Offs
Replacing hazardous waste filter bags requires strict personal protective equipment to avoid toxic dust inhalation. Never use this dry abatement vacuum on standing floodwater or wet slurry because moisture cements toxic dust inside the HEPA pores and ruins the motor. The 4.6-gallon drum demands careful transport to avoid tipping.
- Inspect the silicone motor head gasket for cracks prior to each abatement shift.
- Seal and dispose of used filter bags inside certified hazardous waste containment sacks.
- Wipe the exterior canister with wet disinfectant towels before demobilizing from clean zones.
Factory Warranty Unboxing Manifest
Atrix covers the ATIAHV D4.6 with a 1-Year commercial warranty on the motor, chassis, and electrical components. The carton includes the 4.6-gallon vacuum, castor cart, 10-foot hose, two chrome wands, floor nozzle, crevice tool, dusting brush, and certified HEPA filter cartridge.
