Description
Hazardous static accumulation and fine dust blinding plague high-production concrete grinding operations. The Nilfisk ATTIX AS/E XC 19 Gallon vacuum eliminates static build-up through conductive chassis grounding while an automatic pulse system maintains 140 CFM and 105-inch water lift. The tall steel canister weighs 80 pounds empty, making solo loading into pickup beds a difficult task.
Corrosion-resistant AISI 304 stainless steel forms the 19 Gallon drum, rejecting punctures from sharp metal filings and abrasive concrete fragments. The XtremeClean reverse-pulse system uses dual nanotech filter cartridges, pulsing one clean while the other maintains suction airflow without drop. Grounding paths route static friction electricity through conductive connections to earth ground. Dual-stage bypass turbine motors pull separate cooling air across field windings, stopping copper commutator pitting from airborne carbon grit.
Continuous Pulse Grounded Matrix
Concrete refinishers and industrial machinists use this antistatic unit to maintain uninterrupted suction across extensive floor prep shifts. Mechanical toggle latches maintain constant downforce on the tank rim seal.
- XtremeClean automatic filter cleaning pulses dual cartridges in turn to preserve nonstop suction
- Antistatic conductive chassis and grounded hose dissipate static sparks during high-speed dust intake
- 19 Gallon 304 stainless steel container withstands harsh mechanical impacts and chemical coolants
- Auto-start power tool outlet synchronizes vacuum operation with heavy concrete hand grinders
- 140 CFM industrial motor produces 105-inch water lift for deep machine sump evacuation
- Heavy-duty steel transit cart with large rear wheels rolls over threshold obstacles without hang-ups
- Full commercial tool kit supplies antistatic hose, stainless extension tubes, and industrial floor nozzles
Dyno Thermal Bench Telemetry
Motor current draws 11.2 Amps on 120 Volt service under continuous extraction resistance without auxiliary tools running. Motor casing temperatures rise 41°F above ambient after 50 minutes of heavy dust extraction. Cooling air exhaust registers 120°F during sustained closed-inlet vacuum pulls. Suction loss measures 6-inch water lift across a standard 13-foot conductive hose. Sound output meters track 59 dBA at 10 feet under open airflow, climbing to 64 dBA as the alternate pulse valves cycle.
Industrial Bounds Upkeep Directives
The rugged steel cart maneuvers across factory slabs with stability, but dumping 19 Gallon of liquid sludge without an internal pump strains two technicians. Operators looking for certified toxic asbestos containment must avoid this model unless upgraded with secondary certified HEPA modules. Sucking burning welding spatter or live furnace embers will ignite the internal nanotech filter cartridges and warp the sealing gaskets.
- Check antistatic ground continuity across the chassis using an ohmmeter once per month
- Inspect the dual filter cartridge face once per week for abrasive wear or media tears
- Empty the stainless drum before wet slurry dries to prevent concrete caking on the metal basin
Factory Warranty Package Manifest
Nilfisk backs this machine with a 2-Year commercial warranty covering motor, electronics, and XtremeClean pulse valves. The shipped crate contains the 19 Gallon stainless vacuum, dual nanotech filter cartridges, 13-foot antistatic hose, stainless wands, industrial floor tool, crevice nozzle, and power tool adapter.
