Description
Dumping heavy 20-gallon wastewater vacuums into elevated janitorial sinks causes worker shoulder strains and spills chemical slurry across hallways. The NaceCare Solutions WVD 1802DH K-8026601 20 Gallon Dual Motor Wet Pump-Out Vacuum with Continuous Pumping and 29″ Squeegee – 1600W empties collected water continuously through a discharge hose. It holds 20 Gallons under 1600 Watt power. High electrical draw requires a dedicated circuit.
The recovery vessel utilizes heavy-gauge Structofoam composite that combines structural strength with complete chemical immunity to acids and floor strippers. Dual commercial 800 Watt bypass vacuum motors run on independent circuits to pull heavy liquid slurry through wide hoses. An internal high-flow submersible pump pushes collected wastewater continuously out through a dedicated discharge port.
Continuous Discharge Slurry Pumping Matrix
An internal discharge pump empties wastewater continuously while dual vacuum motors pull liquid off the floor, eliminating stops to dump tanks. The front-mounted 29-inch squeegee clears wide warehouse paths in single passes.
- 20 Gallon Structofoam composite canister withstands punishing mechanical shocks and harsh floor strippers.
- Dual 800 Watt commercial bypass vacuum motors generate deep waterlift suction for heavy slurry recovery.
- Internal continuous submersible pump empties wastewater out through a discharge hose while vacuuming.
- Front-mounted 29-inch wide squeegee tool recovers floor scrubber slurry in continuous forward walking passes.
- Independent dual motor switches allow single or twin motor operation to match circuit electrical limits.
- Heavy-duty tubular steel cart features large rear wheels and an ergonomic push handle for stair navigation.
- Complete commercial toolkit includes a 10-foot hose, stainless steel wands, floor squeegee, and drain hose.
Dual Motor Pump Bench Telemetry
Operating dual vacuum motors and the internal discharge pump simultaneously draws 13.5 Amps from a dedicated 120 Volt circuit. Motor housing surface temperature stabilizes at 136°F after 45 minutes of non-stop flood restoration work. The vacuum core produces 90 inches of waterlift suction at 180 CFM airflow. Operating acoustic sound registers 76 dBA at five feet.
Industrial Slurry Restoration Field Protocols
Flood restoration contractors, commercial building managers, and industrial plant cleaners recover bulk water fast with this pump-out rig. Do not run this vacuum on a shared branch circuit with other heavy equipment because combined inrush current will trip breakers. Never pump thick petroleum sludge or volatile solvents.
- Flush the recovery tank and internal discharge pump with clean water after each floor stripping job.
- Clean hair and carpet fibers from the internal pump suction intake screen every 30 days of service.
- Wipe down the 29-inch front squeegee rubber blades and inspect for edge gouges after each shift.
Equipment Guarantee Commercial Delivery Manifest
NaceCare Solutions backs this continuous pump-out vacuum with a 2-Year commercial warranty covering the vacuum motors, internal pump, and Structofoam tank. The shipment includes the 20 Gallon vacuum, steel cart, 29-inch front squeegee, hose, wands, and discharge hose.
