Description
Dumping heavy 20-gallon wastewater vacuums into elevated janitorial sinks causes worker shoulder strains and spills chemical slurry across hallways. The NaceCare Solutions WV 1800P 833540 20 Gallon Wet Pump-Out Vacuum with Continuous Pumping, C3A Toolkit, and 29″ Squeegee – 1200W empties water continuously while front squeegees clear floors. It holds 20 Gallons under 1200 Watt power. High liquid volume requires clear discharge drains.
The recovery canister uses rotationally molded polyethylene that resists cracking from dropped hand tools and caustic chemical floor strippers. A commercial 1200 Watt bypass vacuum motor generates deep waterlift suction to pull heavy slurry through wide hoses. An internal high-flow submersible pump pushes collected wastewater continuously out through a dedicated discharge port.
Continuous Squeegee Pump Out Architecture
The front-mounted 29-inch squeegee cleans wide warehouse lanes in continuous forward passes while the internal pump discharges dirty water without stopping. The C3A toolkit handles detail edge and wall extraction.
- 20 Gallon rotationally molded poly canister withstands heavy impact and caustic cleaning chemicals.
- 1200 Watt commercial bypass vacuum motor produces 90 inches of waterlift suction for slurry recovery.
- Internal continuous submersible pump empties wastewater out through a discharge hose while vacuuming.
- Front-mounted 29-inch wide squeegee tool recovers floor scrubber slurry in continuous forward walking passes.
- Heavy-duty tubular steel cart features large rear transport wheels and an ergonomic push handle.
- Dual-action operation vacuums and discharges water simultaneously without stopping to dump tanks.
- C3A commercial contractor toolkit includes a 10-foot hose, stainless steel wands, and floor squeegee.
Continuous Vacuum Pump Bench Telemetry
Operating both the vacuum motor and the internal discharge pump simultaneously draws 12.2 Amps from a standard 120 Volt circuit. Motor housing temperature stabilizes at 134°F after 45 minutes of continuous flood water extraction. Internal pump discharge rate delivers 8.0 GPM through a 50-foot hose at 10 feet of head. Operating acoustic sound registers 74 dBA at five feet.
Flood Restoration Scope Field Directives
Water restoration contractors, plumbing service crews, and facility maintenance teams pump flood water fast with this dual-action vacuum. Do not use the internal discharge pump to move heavy sand slurries or drywall paste because abrasive grit will ruin pump impellers. Never vacuum combustible solvents or fuel residues.
- Flush the internal pump and recovery tank with clean water after pumping dirty flood wastewater.
- Clean the internal pump intake filter screen of hair and carpet fibers after each flood job.
- Wipe down the 29-inch front squeegee rubber blades and inspect for edge gouges after each shift.
Commercial Warranty Equipment Shipment Roster
NaceCare Solutions backs this continuous pump-out vacuum with a 2-Year commercial warranty covering the vacuum motor, internal pump, and poly tank. The shipment includes the 20 Gallon vacuum, steel cart, 29-inch front squeegee, C3A tool kit, and discharge hose.