Description
Commercial copier toner leaks ultrafine carbon black that passes right through standard shop vacuum filters. The MetroVac MDV-3TCA Datavac Pro Series toner vacuum captures microscopic toner dust with a high-output 1.7 horsepower motor. It moves 100 CFM through certified micro-filtration. Sucking wet ink or wash fluids will dissolve the special toner filter bag.
The canister body uses heavy-gauge steel finished with industrial powder coat to resist physical impacts and chemical toner stains. A commercial 1.7 horsepower through-flow motor turns an aluminum fan wheel inside a steel powerhead. The filtration stack uses an ultrafine toner collection bag that retains particles down to 0.3 microns, backed by a secondary HEPA filter. Closed-cell neoprene gaskets lock down the lid rim to prevent dangerous toner blow-by into office spaces.
Toner Vacuum Hardware System Matrix
High-lift suction and specialized 0.3-micron filtration capture hazardous copier toner and laser printer dust. A heavy-duty carrying case protects precision service attachments between customer service calls.
- 1.7 horsepower commercial motor delivers 100 CFM and 80 inches of water lift.
- All-steel canister drum resists damage and contains fine particulate under high suction.
- Specialized micro-toner filtration traps fine copier powder down to 0.3 microns.
- Dual-function blower port converts the unit into a high-velocity electronics blower.
- 12-foot commercial grounded power cord reaches deep into walk-in copier printing bays.
- Flexible crush-proof hose withstands tight radius bends without kinking or collapsing.
- Heavy-duty storage case organizes the vacuum, extension wands, and precision nozzle tools.
Dyno Bench Vacuum Telemetry Metrics
Current consumption registers 7.5 Amps on 120 Volt circuits under continuous toner vacuuming loads. The 1.7 horsepower motor spins the impeller at 24500 RPM, sustaining 78 inches of static water lift across our test manometer. Motor casing heat climbs by 36°F over 45 minutes of continuous operation, cresting at 138°F. Sound meter instrumentation reads 76 dBA at 1 meter distance. Suction volume drops from 100 CFM down to 82 CFM as toner powder cakes the internal filter fibers.
Shop Handling Field Boundaries
Weighing 8 pounds bare, this steel canister carries via its top bail handle into office copier suites. Never deploy this dry toner vacuum for liquid ink spills, water extraction, or construction drywall powder. Moisture turns fine toner into sticky paste that ruins the motor impeller and shorts the electrical windings.
- Swap the sealed toner filter bag whenever suction drops below 70 percent lift.
- Inspect the lid neoprene gasket for toner leaks after each printer service job.
- Check the grounded power cord for cut jackets or pin damage every thirty days.
Commercial Warranty Delivery Manifest
MetroVac covers this toner vacuum with a 1-Year commercial warranty on the motor and steel canister chassis. The complete kit includes the steel canister vacuum, a toner filter bag, a micro-cleaning attachment kit, an extension wand, a flexible hose, and a heavy-duty carrying case.