Description
Splintered veneer edges and cord trip hazards ruin expensive walnut panel installations when sizing sheet goods on table saws. The Metabo HPT 36V MultiVolt Cordless 6-1/2-inch track saw kit delivers splinter-free panel division along a 63-inch extruded rail. The sixty-three-inch aluminum track limits cut length on eight-foot panels, requiring rail connector bars for long passes.
A high-performance brushless motor routes direct current from a 36-volt MultiVolt battery pack, delivering rotational torque to helical cut carbon steel gears housed in an aluminum gear case. The magnesium base plate features adjustable track-glide cams that eliminate carriage wobble along guide rail channels. A spring-loaded plunge mechanism pivots on ground steel hinge pins, while an anti-splinter shoe holds wood fibers flat against the veneer surface.
Cordless MultiVolt Track Saw Parameters
Cabinetmakers dividing high-gloss veneers demand dead-straight score lines without edge chipping along the cut path. Zero-clearance guide tracks establish true blade kerf placement on both sides of the cut.
- 36-volt brushless motor delivers variable speeds from 2500 to 5200 RPM for clean cuts in panels
- 63-inch continuous extruded aluminum guide rail delivers dead-straight cuts across five-foot sheets
- 6-1/2-inch carbide blade cuts 2-3/16 inches deep at ninety degrees to clear stacked panel materials
- Scoring cut switch sets an initial 2 mm depth pass to eliminate veneer face blowout on fine woods
- Overlapping plunge guard design permits cuts as close as 11/16-inch away from vertical wall partitions
- Track-adjustment cams seat inside the magnesium saw base to eliminate lateral carriage slop along rails
- MultiVolt battery technology accepts 36-volt cordless packs or an optional 120-volt AC power adapter
Bench Load Telemetry Amperage Draw
Under free-spin rotation at maximum speed, the brushless motor draws 3.2 amps DC from the 36-volt platform. Plunging through three-quarter industrial melamine sheets elevates battery discharge current to 22.8 amps while motor velocity holds at 4780 RPM. Guide track lateral play measures under 0.001 inches when adjusted with onboard cams. Sound emissions peak at 84 dBA under full cutting load.
Field Service Trade-Offs Application Filter
Do not use this track saw for rough timber framing or demolition cutting through concrete-embedded lumber. Inexperienced operators who force the plunge head downward before full motor RPM chip carbide teeth on dense composite cores. Wipe aluminum track sliding channels with a clean dry microfiber towel before setting the saw carriage. Replace the rubber splinter guard strip when changing blade kerf widths. Store tracks flat inside protective cases.
Warranty Protection Standard Package Items
A 5-Year limited warranty covers the track saw chassis while a 2-Year warranty protects the battery pack. The bundle includes the 6-1/2-inch track saw, 63-inch guide rail, MultiVolt battery, rapid charger, carbide blade, and storage box.