Description
Wobbly saw stands and carriage drift ruin wide timber bevel cuts and architectural crown molding runs. The DEWALT 12 in Sliding Compound Miter Saw with Compact Miter Saw Stand bundle pairs a heavy 15-ampere sliding saw with a lightweight folding stand. This corded miter saw setup requires substantial shop footprint and cannot transport inside compact car trunks.
The saw platform incorporates a precision cast aluminum base with stainless steel miter detent plates to maintain angle repeatability across framing operations. Dual horizontal steel guide rails utilize linear ball bearings to guide the 15-amp direct-drive motor smoothly across 14-inch crosscuts. The bundled DWX724 compact stand features lightweight tubular aluminum construction capable of supporting up to 500 pounds with extendable material support arms.
Sliding Miter Stand Matrix
Dual horizontal steel slide rails maintain rigid cutting head tracking during wide timber bevel cuts. The compact folding stand features lightweight aluminum construction and extendable arms supporting ten feet of lumber.
- 15-ampere motor delivers 3800 RPM blade speed for smooth crosscuts in framing and trim stock
- 12-inch carbide blade cuts up to 2×14 dimensional lumber at ninety degrees and 2×10 at forty-five
- Dual bevel mechanism tilts forty-nine degrees left and right with oversized high-visibility scales
- Stainless steel miter plate provides fourteen positive detent stops for fast common angle setups
- Tall sliding fences support vertical baseboard stock up to 6-3/4 inches against the rear table
- DWX724 compact stand features folding legs and extendable arms supporting ten feet of lumber
- Integrated dust collection chute captures wood chips into the included fabric collection bag
Shop Dyno Gearbox Telemetry
Dynamometer load testing records 14.6 amperes steady current draw at 120 volts when crosscutting 4×12 Douglas fir beams. The 12-inch arbor spins at 3815 RPM free speed, settling to 3540 RPM under aggressive manual feed rates. Cutting head deflection across the full 14-inch stroke measures less than 0.0022 inches. Brush motor housing temperature rises 35 degrees Fahrenheit across thirty continuous compound cuts. Acoustic output hits 91 dBA at operator position.
Operational Boundaries Field Service
This heavy miter saw and stand combination requires careful handling to prevent bending the extended aluminum stand support arms. Trim carpenters should not yank the sliding carriage downward aggressively to avoid deflecting the dual steel slide rails. Avoid using 100-foot light gauge cords because voltage drop will burn out the field switch contacts.
- Wipe horizontal steel slide tubes with dry rags daily to remove pitch and abrasive wood dust.
- Inspect carbon brushes every one hundred operating hours and replace before brush length drops.
- Verify miter fence straightness using a precision metal straightedge after transporting the saw.
- Check stand mounting bracket clamp tension and tighten locking levers to prevent saw shifting.
- Blow fine sawdust out of the lower blade guard pivot spring using shop compressed air weekly.
Warranty Parameters Tool Inventory
DEWALT covers this miter saw and stand bundle with a 3-Year limited warranty including one year of free service. The package includes the 12-inch sliding compound miter saw, DWX724 compact miter stand, stand material supports, 12-inch carbide blade, blade wrench, dust bag, material clamp, and manual.
