Description
Heavy concrete cutting and drywall sanding generate fine crystalline silica dust that demands cordless OSHA Table 1 compliance. The Makita GCV02ZU 40V Max XGT lithium-ion cordless brushless 2.1 Gallon dry dust extractor captures toxic particles through certified HEPA filtration and AWS Bluetooth tool synchronization. Purchasing the bare tool requires compatible 40V Max XGT batteries and chargers.
Structural composite resin constructs the 2.1 Gallon canister and top motor housing, absorbing jobsite drops and concrete slurry splashes without cracking. The 40V Max brushless DC motor pulls 148 CFM through an internal turbine, venting clean air through side louvers. The Auto-Start Wireless System connects to paired power tools via Bluetooth, triggering vacuum suction when the operator engages the tool trigger. Certified HEPA filtration captures 99.97% of particulates down to 0.3 microns.
AWS Cordless Extractor Matrix
Remodeling contractors and concrete trades connect rotary hammers and plunge saws straight to this extractor for point-of-origin dust capture. The antistatic hose prevents electrostatic shocks during high-speed masonry extraction.
- 40V Max XGT brushless DC motor delivers 148 CFM and 92-inch water lift for deep dust shroud evacuation
- AWS Bluetooth transmitter syncs vacuum operation with paired power tools in real time
- Certified HEPA filtration system captures 99.97% of hazardous dust particles down to 0.3 microns
- 2.1 Gallon structural composite canister holds fine masonry dust and drywall debris
- Variable speed control dial tunes suction pull to match orbital sanders or plunge saws
- Antistatic suction hose prevents electrostatic charge build-up during dry composite dust collection
- Complete bare-tool kit includes 1-inch antistatic hose, aluminum wands, floor nozzle, and HEPA filter
Battery Dyno Thermal Telemetry
Current draw pulls 12.5 Amps across the 40V circuit under continuous high-power dust extraction. Brushless motor housing temperatures rise 24°F above ambient room levels after 35 minutes of loaded sanding. Battery dock connection terminals maintain 104°F during prolonged full-power operation. Static water lift drops 6-inch water lift across the 11-foot antistatic hose run. Operating sound levels register 64 dBA at 10 feet under open airflow, climbing to 68 dBA under loaded suction.
Contractor Service Operational Protocol
The 18-pound bare chassis rolls across unfinished subfloors with ease, but dragging the unit by its antistatic hose around sharp drywall corners can snap hose cuffs. Flood restoration crews pumping out basements must pass on this dry-only unit, as liquid intake will soak the HEPA filter and short out 40V circuit boards. Sucking smoldering joint compound, hot fire pit ash, or welding sparks will burn through the fleece bag and destroy the HEPA cartridge.
- Check the antistatic hose for internal powder build-up and verify ground continuity once per month
- Inspect the HEPA seal gasket once per week for fine white dust tracks that indicate seal leaks
- Change the fleece filter bag before dust weight causes seam blowouts during extraction
Commercial Warranty Package Manifest
Makita backs this cordless dust extractor with a 3-Year limited warranty covering brushless motor and electronic components. The shipped carton contains the GCV02ZU bare tool vacuum, AWS Bluetooth transmitter, 11-foot antistatic hose, aluminum extension wands, floor nozzle, crevice tool, and certified HEPA filter.