Description
Surface wide hardwood slabs and structural timber beams without cutterhead tear-out or knife change downtime. The Laguna Tools PX|22 SHEARTEC: II planer flattens heavy timber using advanced helical carbide cutterhead technology. This industrial wood planer surfaces figured hardwoods, timber frames, and equipment workbenches across production shops. It cannot run on single-phase electrical supply lines.
A massive cast-iron machine bed, column system, and head casting eliminate structural deflection under heavy wood stock removal passes. A heavy-duty 10HP three-phase electric motor drives the SHEARTEC II helical head through multiple V-belts. Four-sided solid carbide inserts shear wood fibers at an angle, producing glass-smooth surfaces without grain tear-out. Segmented serrated steel infeed rollers and smooth steel outfeed rollers advance lumber smoothly across the polished bed.
Helical Head Planer Hardware Specifications
Commercial millwork facilities and industrial woodworking shops demand heavy helical head planers to surface figured hardwoods without grain tear-out. This machine delivers continuous lumber thicknessing across full work shifts.
- 22-inch maximum planing width surfaces wide rough-sawn lumber boards in single passes
- 10HP three-phase 220-volt electric motor powers through deep cuts in dense hardwoods
- SHEARTEC II helical cutterhead houses four-sided solid carbide insert knives
- Shearing cut geometry eliminates grain tear-out on curly maple and figured timbers
- Segmented steel infeed roller grips boards of varying thickness across the bed width
- Two-speed feed gearbox shifts between 16 and 20 FPM for roughing and finish work
- Five-inch dust extraction port clears high-volume wood chips from the cutterhead
Dynamometer Cutterhead Load Telemetry
Motor dyno testing measures 24 Amps continuous electrical draw at 220 volts under full 1/8-inch stock removal passes across 20-inch wide hard maple slabs. The helical head spins at 5000 RPM, producing an ultra-smooth 38 micro-inch surface finish. Sound pressure tests register 82 dBA under active lumber planing, running 8 dBA quieter than straight-knife heads. Table deflection remains under 0.002 inches across the entire 22-inch bed.
Production Surfacing Usability Boundary Filter
Operators set table height using the electronic digital readout, engage bed roller locks, and slide timber flat onto the cast infeed table. Support long planks with heavy external roller stands. Do not plane boards shorter than nine inches or lumber containing embedded nails.
- Individual carbide insert screws require torque checks to 48 inch-pounds with a Torx driver
- Table elevation screw columns require cleaning and grease application every month
- Dust extraction system demands minimum 1000 CFM airflow to clear heavy chip volume
Industrial Warranty Crate Manifest Details
Laguna Tools protects this PX|22 planer with a 2-Year commercial limited warranty. The wooden shipping crate contains the 22-inch planer unit, SHEARTEC II carbide cutterhead, Torx T-handle wrench, digital depth readout, and comprehensive operator manual.