Description
Dispense diesel and kerosene from mobile truck beds with metric-rated high-flow mechanics. The Fill-Rite 76 LPM 12V DC High flow pump delivers 20-GPM equivalent refueling speed for global fleets. A permanent-magnet 12-volt DC motor turns a precision rotary vane pump. Flow rates decrease when delivery hoses exceed 20 feet in length.
Rugged cast-iron forms the pump housing, finished with durable corrosion-resistant industrial powder coating. Bronze rotor vanes sweep within the machined iron pumping cavity to push fuel with high efficiency. The continuous-duty explosion-proof motor incorporates thermal protection to prevent overheating in desert climates. Threaded 2-inch base adapters fit standard fuel tanks. Carbon ceramic shaft seals stop fuel leaks.
High Flow Mobile Fuel Features
Field mechanics refuel heavy machinery on remote construction sites without access to grid electricity. The heavy-duty DC motor draws straight from vehicle batteries for dependable fuel delivery.
- Permanent-magnet 12-volt DC motor delivers steady power from mobile equipment batteries
- Rotary vane mechanism produces 76 LPM flow for rapid machinery replenishment
- Cast-iron housing withstands mechanical jobsite impacts and severe weather corrosion
- Internal pressure bypass valve stops fluid dead-head overpressure when nozzles shut
- Thermal overload protector shuts off DC power before motor field coils overheat
- Heavy 12-foot dispensing hose withstands abrasion wear across rocky jobsite gravel
- Manual bronze dispensing nozzle with hook allows controlled fuel flow into tanks
DC Dyno Flow Bench Data
Bench testing demonstrates the motor draws 26 Amps across 12-volt DC lines under full 76 LPM diesel flow. Operating pressure stabilizes at 16 PSI across the 12-foot discharge hose. Motor casing temperature reaches 138°F after 30 minutes of continuous fuel dispensing. Sound meters record 74 dBA at 1 meter distance from the pump body.
Field Application Operator Boundaries
You wire this pump to service truck batteries using the included heavy copper power cable. The integrated nozzle boot protects the dispensing tip from road dirt during transit. Do not run this pump dry for longer than 3 minutes. Dry running without fuel lubrication scores the bronze vanes and ruins pump vacuum.
- Inspect the internal wire strainer screen for rust flakes every 30 days
- Check the DC battery cable clamps for corrosion and tight terminal contact
- Ground the transfer tank to vehicle chassis steel to stop static sparks
Commercial Warranty Specifications Manifest
Fill-Rite backs this fuel pump with a 2-Year limited manufacturer warranty. The factory package contains the 12VDC pump, 12-foot fuel hose, manual nozzle, 18-foot power cable, telescoping suction pipe, and installation guide.
