Description
Portable jobsite hydraulics suffer pump cavitation when secondary tooling draws more fluid than single-circuit units can deliver. The Edwards 25 Ton Dual Station Hydraulic Tool PowerLink provides controlled hydraulic pressure to drive portable punch stations, pipe notchers, and cable cutters. It generates 25 Ton ram capacity on demand. Hose drag limits rapid tool movement across spacious shop floors.
The hydraulic reservoir and valving mount inside a heavy 10-gauge structural steel containment frame with welded tube transport handles. A high-pressure axial piston pump delivers fluid through Parker quick-disconnect couplers with internal check valves to stop oil contamination. The hydraulic power core connects through steel hardlines to high-pressure manifolds rated for continuous 3000 PSI industrial duty cycles.
Remote Hydraulic Power Delivery Framework
Dual quick-connect hydraulic ports allow operators to run two remote tools in tandem without swapping hoses. Built-in pressure regulators let mechanics dial in specific tonnages for specialized crimping or punching operations.
- 25 Ton linear force output powers auxiliary ironworker accessories and hydraulic shop presses.
- Dual station manifold connections drive two specialized fabrication tools from one power supply.
- PowerLink electronic control system coordinates foot pedal signals to remote hydraulic valves.
- 4 Horsepower electric drive motor maintains constant hydraulic fluid flow under peak load.
- Heavy-duty transport casters allow operators to roll the power unit between assembly bays.
- High-pressure hydraulic quick couplers eliminate oil dribble during tool changeover procedures.
- Built-in hydraulic pressure gauge monitors operating line spikes during heavy punch cycles.
Hydraulic Fluid Dynamics Heat Testing
Sustained cycle testing shows hydraulic oil temperature rises from 74°F to 158°F during three hours of rapid hydraulic punch cycling. The electric motor pulls 13.5 Amps at 230 Volt single-phase supply while pushing maximum 3000 PSI system pressure. Pump flow delivers 2.8 GPM at idle and maintains 2.1 GPM during high-tonnage cylinder advance. Hydraulic unit operational noise levels register 76 dBA at three feet distance.
Remote Tool Usage Mechanical Guidelines
Structural erection crews and mobile maintenance shops gain immense utility by running hydraulic punches and shears away from main machinery bases. Do not buy this power unit to run high-volume continuous production lines that require cycle rates above 20 strokes per minute because heat buildup will degrade valve seals. Never connect tools requiring greater than 3000 PSI working pressure.
- Inspect external hydraulic hose outer jackets weekly for abrasions, kinks, or exposed wire braiding.
- Replace the spin-on return line hydraulic filter element every 250 hours of auxiliary tool run time.
- Check reservoir sight glass oil levels daily before connecting auxiliary hydraulic implement hoses.
- Purge air from auxiliary tool lines by cycling cylinders through full stroke three times without load.
Manufacturer Terms Packaging Details
Edwards covers the PowerLink hydraulic base unit with a 1-Year commercial warranty against electrical motor failure and hydraulic valve body leakage. The shipped crate includes the 25 Ton power core, dual station hydraulic manifold, two 20-foot high-pressure hydraulic hose assemblies, remote electric foot control switch, and operating manual.