Description
Pressing stubborn axle bearings and straightening bent loader linkages stalls when using undersized 10-ton shop presses. The Baileigh 15 Ton Hydraulic Shop Press HSP-15A provides 30,000 pounds of pressing force for professional maintenance shops. Engineered for automotive fleet garages and equipment rebuilders, it handles heavy press fits. The air-over-hydraulic pump requires continuous shop air.
A rigid H-frame uses heavy-gauge welded structural channel steel with boxed head beams to eliminate lateral flex during heavy pressing operations. A high-pressure pneumatic foot pump drives the movable hydraulic ram, which features a sliding head mount that repositions across the upper frame beam. Frame twisting ruins cylinder seals. This press features precision ground bed support pins and machined guide rails that hold the ram vertical during off-center pressing tasks.
Shop Press Drive Hardware Matrix
Fleet mechanics press heavy axle bearings, straighten bent mower spindles, and broach keyways. Sliding ram heads accommodate asymmetrical parts without repositioning heavy workpieces.
- 15-Ton hydraulic cylinder delivers 30,000 pounds of pressing force for stubborn fleet components.
- Sliding cylinder head moves across the top beam for off-center pressing flexibility.
- Pneumatic foot pedal pump actuates the ram using 90 to 120 PSI shop air for hands-free control.
- Manual hand pump lever provides backup actuation for delicate, high-feel broaching passes.
- Multi-position work bed adjusts vertically through six pin stops to clear tall steering knuckles.
- Industrial pressure gauge displays real-time tonnage to prevent exceeding component yield limits.
- Included heavy steel V-block arbor plates provide stable support for round shafts and tubes.
Hydraulic Pressure Bench Telemetry Data
Dyno bench testing with 110 PSI pneumatic input generates 7900 PSI hydraulic cylinder pressure at full 15-ton lockup. Ram advance rate measures 1.4 inches per second under zero load, tapering to 0.18 inches per second under maximum resistance. Lower bed beam deflection measures 0.018 inches across a 24-inch span under full load. Hydraulic fluid temperature rises 16°F above ambient room temperature after thirty continuous full-tonnage press cycles. Sound output peaks at 76 dBA during pneumatic pump cycling.
Fleet Garage Safety Work Boundaries
Never press workpieces without locking the lateral ram carriage clamp tight to prevent cylinder kickout under load. Do not purchase this 15-ton press for heavy commercial truck kingpins requiring 50-ton pressing capacity. Positioning unhardened steel blocks under the ram causes dangerous metal slippage and projectile risks.
- Purge moisture from the air line water separator per day before operating the pneumatic pump.
- Inspect the hydraulic ram seal per month for fluid seepage or dirt contamination.
- Check bed support pin holes every 6 months for frame hole elongation or cracking.
Baileigh Commercial Warranty Package Contents
Baileigh backs this 15-ton shop press with a 1-Year commercial warranty covering the welded H-frame, hydraulic cylinder, and air-over-hydraulic pump. The shipping crate contains 1 15-ton shop press unit, 1 pneumatic foot pump, 2 steel V-blocks, and 1 complete user instruction manual.