Description
Porcelain tile chipping and carriage track binding ruin expensive stone installations on tight bathroom remodeling deadlines. The Diamond Products 9 in Tile saw cuts dense vitrified pavers using a direct-drive 800-watt electric motor spinning at 3600 RPM. Stamped water trays flex during transport, spilling slurry across finished subfloors when operators maneuver through narrow interior corridors.
The motor features high-temperature copper windings insulated with thermoset resin to survive continuous moisture exposure. Dual-sealed stainless steel ball bearings support the ground drive arbor, preventing axial play that fractures delicate glass tiles. A machined aluminum rolling carriage rides on chrome-plated steel guide rails fitted with brass wipers that clear wet abrasive grit before slurry penetrates the roller track bearings.
Wet Tile Saw Mechanical Specifications
Stone fabrication demands zero arbor runout and continuous water delivery across the diamond matrix rim. Rolling carts must glide without side play to prevent edge blowouts on large format porcelain.
- 800-watt induction motor delivers steady rotational torque at 3600 RPM without brush wear problems
- 9-inch diamond rim blade cuts two-inch pavers in single passes without bogging down
- Submersible water pump delivers continuous flow through twin copper nozzles to suppress silica dust
- Machined rolling carriage glides on twin steel rails to maintain straight score lines
- Die-cast aluminum plunge arm articulates on hardened pivot pins for internal electrical cutout pockets
- Removable rubber table mat grips slippery stone slabs to stop lateral sliding during feeding
- Zinc-plated splash guards deflect dirty slurry back into the high-impact polymer catch tray
Bench Load Telemetry Amperage Draw
The motor pulls 6.8 amps at idle on standard 120-volt lines. Pushing thick granite slabs past the continuous diamond rim elevates draw to 11.4 amps while arbor speed decreases from 3600 RPM down to 3310 RPM. Flange runout measures 0.0003 inches total indicator reading prior to load engagement. Operating sound peaks at 84 dBA at the ear during wet porcelain cuts. Slurry pump delivery maintains 1.8 gallons per minute at fifteen inches of head.
Field Service Trade-Offs Application Filter
Do not buy this tool for dry masonry slicing or large road curb demolition. Operators feeding dry concrete pavers bake the motor stator and glaze the sintered diamond edge. Flush tile slurry out of the water basin after every work shift to stop sediment buildup. Grease carriage guide rail tracks with water-resistant marine lubricant every thirty operating hours. Inspect the submersible pump inlet screen for stone chips prior to initial startup each morning.
Warranty Protection Standard Package Items
A 1-Year limited warranty covers electrical motor failure and structural carriage defects under normal trade usage. The shipping container includes the wet tile saw, submersible water pump, 9-inch continuous diamond blade, miter guide, splash shield unit, drain plug, and arbor maintenance wrenches.