Description
Pull twisted chassis frames and lift heavy diesel commercial mowers without breaking shop equipment. The Atlas Lifting and Rigging Titon 3.2 Ton lever hoist generates 7050 lbs of mechanical pulling force across a 15-foot chain drop. This rigging unit features a double pawl Weston mechanical brake. The system requires firm manual input on the lever arm to hold tension under severe loads.
Grade 100 heat-treated alloy steel links form the continuous load chain, resisting stretch and abrasive shop floor grit. A cast ductile iron casing encloses the reduction gears to stop housing flex during maximum rated pulls. The short-stroke steel lever arm drives hardened drive pinions with minimal swing clearance. Swivel alloy hooks feature heavy-duty safety latches, seating onto machine anchor points without binding or twisting the suspension chain during vertical lifts.
Key Features of Atlas TLH-032-15
Rigging specialists use this 3.2-ton hoist to straighten warped deck steel and pull seized axle assemblies. The extended 15-foot chain provides reach for deep ditch vehicle recovery jobs.
- 3.2-ton 7050 lb lifting capacity pulls bent structural steel components back into factory alignment
- 15-foot Grade 100 heat-treated chain provides reach for high ceiling gantry setups
- Double pawl mechanical brake locks suspended machinery securely without hydraulic creep
- 360-degree forged steel swivel hooks prevent chain twist during off-axis pulling cycles
- Ductile cast iron housing resists fracturing under rough commercial jobsite impacts
- Short steel lever handle operates inside tight mower chassis compartments with minimal swing arc
- Manual freewheeling drive knob permits rapid chain feed prior to load hookup
Tensile Load Dyno Testing Telemetry
Static proof testing verifies zero brake slip at 10575 lbs, hitting 150 percent of mechanical rated capacity. Manual handle force measures 74 lbs under maximum load pull conditions on the test stand. Sound emission measures 71 dBA during continuous high-speed ratchet strokes. Hook throat yield begins at 400 percent of rated load limits, preventing catastrophic drop accidents. The reduction gear train delivers 93 percent mechanical efficiency across dirty, unlubricated link chain test cycles.
Shop Operation Rules Negative Safety Bounds
Turn the direction pawl to neutral to advance chain slack by hand before tensioning the rigging hardware. Keep load lines straight to prevent bending stresses on the external chain guide brackets. Do not use this lever hoist for overhead personnel lifts or drag operations across sharp concrete edges.
- Grade 100 chain links require light coats of ISO 68 machine oil monthly
- Brake disc linings must remain completely dry and free from grease contamination
- Top and bottom swivel hooks require caliper throat checks every 90 days
Atlas Titon Hoist Warranty Manifest
Atlas Lifting backs this lever hoist with a 1-Year commercial mechanical warranty covering material defects. The shipping box includes the 3.2-ton hoist body, 15-foot load chain, bottom latch hook, factory test certificate, and an illustrated operations manual.