Description
Move extra-long commercial mower cutting decks and gang reel assemblies across equipment warehouses. The Vestil 84 Inch x 27 pallet truck provides 4400 lbs of hydraulic carrying capacity on extended 84-inch fabricated forks. This long-wheelbase pallet jack demands wide turning radiuses, restricting maneuvering within narrow maintenance aisles and crowded trailer interiors.
Fabricated heavy-gauge steel channel forms 84-inch reinforced forks that prevent sagging deflection under distributed deck loads. A cast steel hydraulic pump delivers smooth lift elevation with an integrated overload bypass valve to protect seals. Polyurethane steer wheels and tandem front load rollers distribute payload weight across concrete shop slabs. The spring-loaded loop handle features three-position fingertip controls for raising, rolling in neutral, and controlled load lowering around expensive grounds equipment.
Key Features Vestil PM4-2772
Turf equipment manufacturing and distribution facilities utilize this long-fork pallet truck to transport wide mower decks. The extended 84-inch tines support oversized pallets without balance tip hazards.
- A 4400 lb load rating supports wide-area rotary mower decks and gang mower frames.
- Extended 84-inch fork tines support long commercial equipment crates without load tipping.
- Standard 27-inch outer fork spread provides lateral stability for wide equipment pallets.
- Chrome-plated hydraulic piston rod resists corrosion in wet turf washdown environments.
- Tandem polyurethane load rollers traverse floor cracks and expansion joints without binding.
- Spring-return loop handle returns upright automatically when released by service bay workers.
- Pressure-relief overload valve prevents operator lifting beyond 4400 lb rated machine limits.
Long Fork Load Telemetry
Static load testing applies 4400 lbs of distributed weight across the 84-inch fork tips, with maximum fork deflection measuring less than 0.38 inches. Hydraulic pump pressure registers 2800 PSI at full 7.8-inch lift height, maintaining elevation without seal bypass over 45-minute tests. Initial rolling breakaway force requires 52 lbs of pull effort on clean shop concrete. Steering swivel bearings demonstrate smooth 200-degree rotation under full load, while polyurethane wheel treads withstand continuous exposure to hydraulic fluid drips.
Facility Handling Transport Guidelines
Technicians verify forward path clearance before moving extended 84-inch fork loads through warehouse doorways. Never transport tall unstrapped mower assemblies that can tip during abrupt turns. Do not run this extended pallet jack across dock levelers with steep ramp angles.
- Inspect long fork pushrods for bend distortion or weld cracks every 30 days.
- Lubricate steer wheel thrust bearings through grease fittings with lithium grease quarterly.
- Check hydraulic fluid level in reservoir plug port every 6 months of active service.
Commercial Warranty Crate Manifest
Vestil backs this pallet truck with a 1-Year commercial warranty covering hydraulic pump components and structural fork frame steel. The shipping skid contains the 84-inch pallet truck assembly, spring-loaded steering handle, tandem polyurethane rollers, and manufacturer service instructions.