Description
Drain muddy trenches, floodwater retention basins, and construction excavations on remote sites. The Red Lion Engine Driven Aluminum Trash pump shifts dirty water across harsh worksites. A 208cc commercial gas engine drives a cast-iron semi-trash impeller. Centrifugal pump mechanics require initial manual water priming in the casing before suction lines pull liquid.
Solid tubular steel creates the roll-cage chassis, finished with chip-resistant black powder paint. A 208cc OHV gas engine provides shaft power through a cast-iron cylinder sleeve. The die-cast aluminum pump volute features an internal cast-iron impeller and silicon carbide mechanical seals. Rubber dampeners isolate engine pulses from the cart frame. Standard 3-inch NPT ports connect contractor hoses.
Engine Driven Trash Specs Overview
Excavation crews clear dirty stormwater from jobsite trenches without electrical line hookups. The wide 3-inch discharge neck allows swift drainage of muddy gravel runoff.
- Commercial 208cc OHV engine delivers dependable rotational torque for continuous dewatering
- Cast-iron semi-trash impeller moves 264 GPM while passing solids up to 0.75-inch diameter
- Die-cast aluminum casing cuts unit weight for fast jobsite transport and loading
- Tubular steel roll-cage shields engine and pump components from crushing worksite impacts
- Silicon carbide mechanical shaft seal resists wear from abrasive sand particles
- Standard 3-inch NPT suction and discharge ports hook straight to commercial hoses
- Rubber vibration isolators absorb engine pulses to stop pump walking on concrete
Engine Dyno De-Watering Telemetry
Dynamometer bench testing demonstrates the 208cc engine maintains 3550 RPM under a 25-foot dynamic discharge head. Fluid flow stabilizes at 240 GPM through 50 feet of 3-inch lay-flat hose. Crankcase oil temperature reaches 182°F after 3 continuous hours of full-throttle operation. Fuel consumption measures 0.54 GPH. Sound telemetry indicates 86 dBA at 5 meters distance.
Worksite Performance Practical Notes
You lift this heavy pump across jobsites using the tubular steel roll cage. The broad footprint keeps the pump upright on muddy ditch banks. Do not start this engine without filling the pump housing with water first. Operating the pump dry melts the silicon carbide shaft seal within 60 seconds.
- Fill the pump priming chamber with clean water before pulling the starter cord
- Inspect the suction hose gasket for airtight seals to prevent vacuum loss
- Drain the pump casing plug before winter storage to prevent freeze cracking
Commercial Warranty Specifications Manifest
Red Lion covers this engine-driven trash pump with a 2-Year limited commercial warranty. The shipping box contains the centrifugal trash pump, steel roll cage, 3-inch hose couplings, suction strainer screen, and complete operator manuals.
