Description
Commercial jobsites transition between rough framing without power drops and finished fit-outs with live wall receptacles. The Makita XCV04Z 18V X2 LXT Lithium bare hybrid extractor runs on dual 18V packs or standard 120 Volt line power. It extracts 74 CFM cordless or 127 CFM corded. Pushing the dry unit through wet floor slurry will ruin internal filters.
The collection drum consists of heavy antistatic polymer that prevents static sparks during drywall sanding. A dual-winding brushed motor integrates with an AC/DC selector circuit to handle alternating line current or direct battery power. The certified HEPA cartridge mounts within a sealed chamber compressed by cellular silicone gaskets. Rigid metal latches anchor the motor head to the lower drum, preventing suction loss when technicians roll the machine across uneven concrete subfloors.
Bare Hybrid Extractor Hardware
This bare-tool hybrid vacuum lets contractors utilize existing 18V LXT batteries or plug straight into extension cords. The 2.1-gallon tank accommodates daily construction waste without excessive weight.
- Hybrid power selector switches operation between two 18V batteries and 120 Volt AC.
- Dual-stage HEPA filter retains 99.97 percent of fine particulate down to 0.3 microns.
- 2.1-gallon dry capacity drum unhooks via two mechanical zinc-plated latches.
- Variable suction speed dial regulates airflow to balance battery life with dust collection.
- Antistatic 1-1/2-inch hose prevents operator static shocks during concrete prep.
- Detachable AC power cord disconnects to eliminate cord dragging during mobile cleanup.
- Locking caster wheels hold the vacuum drum steady on sloped staging ramps.
Dyno Bench Load Telemetry
Under continuous 120 Volt AC testing, current draw holds steady at 9.1 Amps while generating 127 CFM through the open intake port. On twin 18V battery power, current draw registers 16.4 Amps, producing 74 CFM and 36 inches of static water lift. Motor housing heat climbs 36°F during 40 minutes of corded operation, leveling off at 137°F. Sound meter instrumentation logs 75 dBA corded and 64 dBA cordless at 1 meter. Commutator brush contact surfaces show minimal pitting under load.
Shop Handling Field Boundaries
Weighing 19.8 pounds bare, this vacuum rolls over extension cords and plywood seams on wide rear wheels. Never deploy this bare dry extractor for wet tile sawing, sump pumping, or plumbing leak extraction. Sucking water dissolves the dry HEPA media, shorts the internal AC/DC switching relay, and corrodes the motor commutator.
- Inspect carbon motor brushes for wear every 100 operating hours.
- Shake out the pre-filter damper cloth after dumping each full tank load.
- Check the AC cord connection pins for corrosion or looseness every month.
Commercial Warranty Delivery Manifest
Makita protects the XCV04Z bare hybrid dust extractor with a 3-Year commercial warranty covering motor assemblies and hybrid switching components. Delivery contents include the bare hybrid extractor, a detachable AC power cord, an antistatic hose, a floor nozzle, a crevice tool, and two plastic disposal bags.