Description
Bumping utility vehicles across pasture ruts sloshes chemical solutions and cracks thin-wall rotational molded poly tanks. The Enduraplas 100 Gallon Field Boss Xstream UTV Sprayer mounts into standard utility vehicle beds to apply pasture herbicides, fertilizers, and fire suppression water. It pairs a 100 Gallon tank with a Honda-powered centrifugal pump. Weight slosh affects UTV stability on steep hillside contours.
The chemical tank features thick-walled heavy-duty polyethylene with integrated anti-surge internal baffle walls to control fluid surge across rough terrain. A rigid structural steel tube frame supports the tank base and encases the engine-pump package inside protective perimeter tubing. The commercial Honda GX160 engine couples directly to an all-cast-iron pump wet-end with abrasion-resistant silicon carbide shaft seals.
Pasture Management Liquid Delivery Architecture
High-volume pump capacity gives ranch managers rapid chemical coverage through broadcast nozzles or long-distance hose reel work. The integrated frame slides directly between UTV wheel wells for clean bed placement.
- 100 Gallon heavy-wall poly tank features molded fluid gallon markers and UV-stabilized polymer resin.
- Honda GX160 commercial engine delivers dependable 4.8 Horsepower performance through recoil start.
- Cast-iron high-pressure pump wet-end produces up to 65 GPM fluid delivery or 120 PSI peak pressure.
- Heavy steel hose reel holds 100 feet of 1/2-inch commercial chemical spray hose for remote spraying.
- High-pressure fire-style spray gun adjusts from wide fog atomization to a 40-foot solid stream.
- Welded steel fork pockets allow clean tractor forklift loading and unloading from utility vehicle cargo beds.
- Dual-zone valving lets operators switch instantly between boomless spray heads and manual hose guns.
Pump Flow Telemetry Engine Heat Profiling
The Honda GX160 engine runs at 3600 RPM under load while burning 0.42 GPH of gasoline during high-pressure spraying. Engine oil crankcase temperatures reach 218°F after two hours of continuous pasture spraying in 90°F summer ambient conditions. Pump discharge line pressure stabilizes at 95 PSI at 45 GPM flow through open nozzles. Operating sound emissions measure 84 dBA at seven feet from the engine block.
Pasture Rig Boundaries Maintenance Directives
Ranchers, rural fire departments, and large estate managers spray ditch lines and noxious weeds efficiently with this skid unit. Do not buy this 100 Gallon unit for small 500cc UTV platforms because total wet weight reaches nearly 1100 pounds and exceeds light suspension payload limits. Never pump wettable powders without cleaning the suction line filter screen after every tank.
- Drain the cast-iron pump wet-end before winter freezes to prevent cracked casing walls.
- Service the Honda foam air filter every 25 operating hours when running down dusty pasture trails.
- Check the torque on the steel skid-to-chassis hold-down bolts after every 50 hours of rough terrain driving.
Commercial Warranty Equipment Shipment Roster
Enduraplas protects the tank with a 10-Year manufacturer warranty and provides a 3-Year commercial Honda engine warranty. The complete crated system ships with the 100 Gallon baffled poly tank, steel skid frame, Honda-driven pump, heavy hose reel, 100 feet of hose, and long-range spray gun.
