Sale!

Husqvarna Construction 4 Gallon Battery-Powered Pressurized Water Tank Kit

Original price was: $411.00.Current price is: $82.20.

SKU: 599582406 Category: Tag:

Description

Dry cutting masonry brick and concrete slab edges creates lethal crystalline silica dust clouds that choke jobsite operators. The Husqvarna Construction 4 Gallon Battery-Powered Pressurized Water Tank Kit suppresses concrete dust during handheld power cutter operations without dragging long garden hoses. It supplies pressurized water using an 18 Volt battery. Four gallons of capacity requires frequent water refills on long cuts.

The water vessel uses impact-resistant high-density polyethylene reinforced with heavy base ribs to survive rough drops from scaffolding or truck tailgates. An internal 18 Volt electric diaphragm pump eliminates manual hand pumping to maintain constant spray pressure at the blade guard. The quick-connect water coupling utilizes forged brass fittings with stainless steel internal ball locks to stop water leaks.

Dust Suppression Pressurized Hardware Matrix

Instant battery-powered water pressure keeps commercial cutting crews fully OSHA Table 1 compliant when coring or cutting structural concrete. The lightweight tank design sits stable next to floor saws or rides on transport carts.

  • 4 Gallon capacity poly tank delivers continuous suppression water to diamond power cutters.
  • Integrated 18 Volt battery platform powers an electric pump to maintain constant 40 PSI pressure.
  • Continuous battery run time provides up to 2.5 hours of steady water pumping per single battery charge.
  • Forged brass water line quick coupler fits standard Gardena-style hose connections on diamond saws.
  • Molded top transport handle allows easy carrying around staging decks and scaffolding towers.
  • Wide tank base footprint stops tipping when dragging the supply hose around floor cutting lines.
  • Integrated battery compartment door protects sensitive electrical terminals from jobsite water slurry.

Electric Pump Current Pressure Telemetry

The internal 18 Volt micro-diaphragm pump pulls 1.8 Amps under continuous spraying, maintaining a rock-solid 38 PSI discharge pressure at the blade manifold. Flow rate measures 0.45 GPM through standard concrete cutter dual-nozzle kits. Battery cell internal temperature rises by 12°F over a full 4-gallon water tank discharge run. Acoustic pump hum remains ultra-quiet at 52 dBA measured three feet away.

Silica Control Envelope Operational Rules

Masonry contractors, demolition crews, and utility repair teams cutting asphalt or concrete slabs keep dust controlled with this mobile kit. Do not buy this small tank unit for large walk-behind street saws because the 4-gallon volume empties in nine minutes of wide-blade trench cutting. Never fill this container with combustible solvents, form oils, or harsh chemical acids.

  • Rinse out the internal tank sediment filter screen after every workday to stop pump intake clogging.
  • Wipe the lithium-ion battery terminal cavity dry before inserting fresh battery packs into the dock.
  • Pump clean water through the supply line and drain the tank completely before freezing winter storage.

Commercial Warranty Unboxing Kit Breakdown

Husqvarna covers this pressurized dust suppression kit with a 1-Year commercial warranty against electrical pump defects and tank molding cracks. The kit includes the 4 Gallon poly water tank, integrated 18 Volt electric water pump, 10-foot water supply hose with brass fittings, one 18 Volt battery, and charger.