Description
Position large structural loads with Power Team 30 Ton 6in Cylinder stroke capacity when maintenance work requires longer hydraulic travel. Experienced millwrights and bridge-service crews gain controlled extension during cable tensioning, anchor-bolt work, forcing, and machinery alignment, but can the cylinder resist side force without a centered saddle and mechanical support? Its Power-Tech-treated body, piston, gland nut, plated rod, interchangeable head inserts, and corrosion-resistant standpipe support industrial hydraulic work.
Model RH306 is a 30-ton, 6-inch-stroke, single-acting RH Series cylinder. Product data identifies ANSI/ASME B30.1 compliance, 9796 3/8-inch NPT female half coupler, Power-Tech treatment on the cylinder body, piston, and gland nut, and a plated piston rod with wear-resistant packing. The model excludes a threaded collar and uses a cylinder configuration listed at 39 lbs. Confirm the current pressure and dimensional data before service.
Features of Power Team RH
Bridge maintenance, structural tensioning, machinery installation, and industrial forcing require a longer-stroke cylinder with compatible pump control. Qualified operators can use RH306 after verifying load direction, head contact, hydraulic pressure, hose routing, and cribbing.
- 30-ton capacity supports compatible forcing and structural alignment operations.
- 6-inch stroke provides extended hydraulic movement for equipment adjustment.
- Single-acting design uses hydraulic extension with controlled return.
- Power-Tech-treated body and piston resist corrosion and abrasion.
- Plated piston rod supports wear resistance during repeated cycling.
- Interchangeable piston-head inserts expand application flexibility.
- 3/8-inch NPT female coupler supports compatible Power Team pumps.
Hydraulic Load Test Control
No independent pressure test, seal-leak result, piston-deflection measurement, proof-load certification, stroke-speed report, or side-load test was supplied. Do not treat 30 tons as a proof load. Off-center contact, unstable saddles, damaged hoses, contaminated fluid, excessive pressure, and insufficient cribbing can create uncontrolled movement or load loss.
Hydraulic Limits Service
The 6-inch stroke, Power-Tech treatment, plated rod, interchangeable head inserts, and single-acting circuit support industrial forcing and alignment. This cylinder is not verified for personnel lifting, side loading, pulling without approved accessories, permanent support, or suspended loads without mechanical blocking.
- Inspect the body, piston rod, gland nut, coupler, hose, head insert, and standpipe.
- Use clean compatible hydraulic fluid and prevent contamination at every connection.
- Block raised loads mechanically and remove the cylinder after leakage or rod damage.
Warranty Compliance Contents
Power Team lists a Lifetime Warranty Against Manufacturer’s Defects for model RH306 and ANSI/ASME B30.1 compliance. Package contents identify one 30-ton cylinder. Confirm current warranty terms, pump requirements, coupler, head inserts, operator documentation, pressure limits, and inspection procedures before industrial use.