Description
Align heavy loads with Atlas Lifting and Rigging ALH overload-protected control when a 3.2-ton capacity and 20-foot chain suit long industrial rigging tasks. Experienced maintenance crews gain extended manual reach during machinery alignment, structural fit-up, and plant repair, but can the anchor and lower hook carry force along one straight load path? Its all-steel construction, zinc-coated components, sintered brake, welded stay bolts, and high-strength side plates support controlled lifting and tensioning.
Model ALH-032-20-OP lists a 7,000-lb maximum load, 20-foot lift, 61.16-lb assembled weight, 8-inch depth, 6.5-inch width, and 20.5-inch height. The hoist includes quick-adjust free-spool operation, overload protection, zinc-coated components, welded structural stay bolts, high-strength side plates, a sintered brake, and blue grease. Published data identifies ASTM B30.21 compliance and a 3-Year Limited Warranty.
Features of Atlas ALH
Machinery maintenance, construction rigging, fabrication, and utility work require a portable lever hoist that reaches beyond short-chain connection points. Qualified operators can use this 3.2-ton ALH model after verifying the anchor, chain path, hook seating, load balance, and marked working load limit.
- 3.2-ton capacity supports compatible machinery and structural components.
- 7,000-lb maximum load is listed for compatible industrial lifting applications.
- 20-foot chain length reaches elevated beams and remote rigging points.
- Quick-adjust free-spool operation helps position chain before applying tension.
- Overload protection provides an additional listed control feature.
- Sintered brake construction supports controlled holding when the lever stops.
- Welded stay bolts reinforce the all-steel hoist housing.
- High-strength side plates support the internal lever-hoist structure.
Load Test Capacity Control
No independent proof-load result, overload activation test, brake-holding measurement, chain elongation test, hook-throat measurement, or field telemetry was supplied. Do not treat 7,000 lbs as a proof load or breaking strength. Shock loading, side loading, corrosion, poor anchoring, and misaligned hooks can increase stress through the chain, brake, hooks, side plates, and support point.
Rigging Limits Service
The 20-foot chain, manual lever, free-spool adjustment, overload protection, sintered brake, and steel housing support controlled industrial load positioning. This hoist is not verified for personnel lifting, side-loaded hooks, shock loading, operation above the marked capacity, or suspended loads over personnel.
- Inspect the load chain for stretch, twisting, corrosion, cracks, gouges, and damaged links.
- Check hooks, latches, brake parts, stay bolts, side plates, and anchor connections.
- Test the lever and overload-control behavior without a suspended load before service.
Warranty Compliance Contents
The product listing states a 3-Year Limited Warranty and ASTM B30.21 compliance. Package contents identify the hoist, while chain configuration and documentation should be confirmed. Verify current warranty terms, nameplate capacity, operator manual, inspection certificate, 20-foot chain, hooks, safety latches, and applicable OSHA requirements before commercial lifting.