Description
Service passenger cars and light trucks with Bendpak LR-60 Low Rise lifting equipment when a full-rise bay is unavailable. Experienced automotive technicians gain 6,000-lb vehicle capacity with a low-rise electric-hydraulic platform during brake, tire, wheel, and underbody work, but can the lift support a vehicle safely when the pad layout and safety locks are not correctly engaged? Its heavy-duty steel channel frame, rubber lifting blocks, dropped crossbar, and multi-position locks support low-rise vehicle service on a suitable floor.
Model 5175729 uses an electric-hydraulic power system, multi-position safety locks, rubber lifting blocks, a dropped crossbar for additional clearance, and a heavy-duty steel channel frame. Published product data lists 6,000-lb capacity, 814-lb assembled weight, and a 2-Year Warranty. Additional product information identifies a 4-inch lowered height, approximately 26-inch maximum lift, 53-inch pad length, and 70.5-inch overall width.
Features of Bendpak LR-60
Automotive repair shops, tire centers, independent garages, and fleet maintenance departments need a low-rise vehicle lift for fast access beneath cars and light trucks. Trained technicians can use this electric-hydraulic lift when vehicle weight, pad placement, floor condition, and mechanical locks are verified before service.
- 6,000-lb capacity supports compatible passenger cars and light trucks.
- Low-rise design preserves overhead clearance in smaller service bays.
- Electric-hydraulic power supports controlled vehicle elevation and lowering.
- Rubber lifting blocks help distribute contact pressure beneath approved vehicle lift points.
- Multi-position safety locks support mechanical load holding during service.
- Dropped crossbar provides additional clearance beneath selected vehicle chassis.
- Heavy-duty steel channel frame supports the low-rise lifting platform.
- Optional portable LR-60P configuration is sold separately and should not be assumed included.
Vehicle Load Test Control
No independent proof-load result, hydraulic pressure test, frame-deflection measurement, lock-holding telemetry, pad-load distribution test, or vehicle compatibility certification was supplied. Do not treat 6,000 lbs as a proof load. Incorrect pad placement, uneven flooring, damaged blocks, unlocked safety positions, or an unbalanced vehicle can compromise stability. Stop service if the lift tilts, drifts, leaks, or fails to engage its locks.
Vehicle Service Limits
The electric-hydraulic system, rubber blocks, steel frame, dropped crossbar, and multi-position locks support low-rise automotive service. This vehicle lift is not verified for personnel lifting, unsupported work beneath an unlocked vehicle, unstable foundations, loads above 6,000 lbs, or vehicles outside the manufacturer’s approved contact-point range.
- Inspect hydraulic hoses, cylinders, lifting blocks, locks, frame channels, and electrical controls before use.
- Confirm vehicle weight, center of gravity, pad placement, wheel clearance, and lock engagement before raising.
- Keep the lift clean and remove it from service after hydraulic leakage, block damage, or abnormal descent.
Warranty Compliance Contents
BendPak product data lists a 2-Year Warranty for model 5175729. Package contents identify the low-rise lift, while rubber lifting blocks are listed as included features. Confirm current warranty terms, installation manual, electrical requirements, lock documentation, lifting blocks, floor specifications, and service instructions before commercial installation.