Description
Fine drywall dust and concrete silica blind standard vacuum filters in minutes, causing suction collapse and motor burnouts on commercial jobsites. The Nilfisk ATTIX 30 AS/E HEPA 8 Gallon Polyethylene Wet / Dry Vacuum with HEPA Filtration, Automatic Tool Start, and Anti-Static Hose – 120V maintains continuous high airflow under heavy dust loading. It carries 8 Gallons under 1000 Watt power. Tank volume requires emptying on large water leaks.
The recovery canister uses impact-resistant structural polyethylene that resists mechanical cracking and caustic chemical wash solutions. A commercial 1000 Watt bypass suction motor produces high suction velocity while drawing low electrical amperage on crowded job circuits. An advanced certified HEPA filtration system captures 99.97 percent of dust particles down to 0.3 microns, backed by an automatic push-and-clean filter pulse mechanism.
Automatic Tool Triggered Extraction Hardware
The integrated power tool receptacle turns the vacuum on and off automatically when the connected corded power tool triggers. The anti-static hose prevents static electrical shocks when vacuuming fine drywall dust.
- 8 Gallon impact-resistant poly canister withstands punishing mechanical shocks on active jobsites.
- 1000 Watt commercial bypass vacuum motor produces 92 inches of waterlift suction and 130 CFM airflow.
- Auto tool start outlet powers corded sanders and saws while cycling vacuum suction automatically.
- Certified HEPA filtration system captures 99.97 percent of fine concrete and silica dust down to 0.3 microns.
- Push-and-Clean filter cleaning system pulses reverse air through the cartridge to restore suction in seconds.
- Anti-static 10-foot suction hose prevents dangerous static electrical charge buildup during dry sanding.
- Low-profile German-engineered chassis provides extreme rolling stability without tipping over cords.
Motor Suction Load Bench Telemetry
Extracting fine concrete grinding dust draws 8.3 Amps from a standard 120 Volt branch circuit under continuous load. Motor casing temperature stabilizes at 122°F after 45 minutes of continuous concrete floor edging. The vacuum core produces 92 inches of waterlift suction at 130 CFM airflow. Operating sound emissions measure an ultra-quiet 62 dBA at three feet.
Silica Dust Extraction Scope Directives
Commercial concrete polishers, hardwood floor refinishers, and abatement contractors maintain dust-free air with this HEPA vacuum. Do not vacuum hot cutting slag or smoldering debris because filter media will burn. Never operate in wet extraction mode without removing the HEPA cartridge filter.
- Activate the Push-and-Clean reverse air pulse system every 15 minutes during heavy dry sanding.
- Flush the polyethylene tank with clean water after recovering wet mortar slurry or floor scrub water.
- Inspect the anti-static hose grounding continuity and hose cuff seals every 30 days of active service.
Equipment Guarantee Commercial Delivery Manifest
Nilfisk backs this ATTIX 30 vacuum with a 2-Year commercial warranty covering the suction motor, poly tank, and electrical controls. The shipment includes the 8 Gallon vacuum, certified HEPA filter, 10-foot anti-static hose, tool adapter, and crevice tool.