Description
Large commercial washrooms and floor stripping projects generate thick chemical slurries that overflow standard utility vacuums. The Powr-Flite PF54 15 Gallon Polyethylene wet dry vacuum handles heavy liquid volume with a 1.6 HP commercial motor pulling 100 CFM. The rear gravity drain hose empties slow when choked with viscous wax stripping residues.
Heavy-duty molded polyethylene forms the 15 Gallon drum, resisting corrosion from harsh wax strippers, floor degreasers, and acidic neutralizers. An isolated bypass motor architecture prevents corrosive chemical fumes from crossing the carbon brushes and armature windings. Aluminum impeller blades maintain tight tolerances inside the vacuum shroud to preserve column lift under high air resistance. Dual steel latch clamps exert continuous downward force on the head gasket to prevent suction loss.
High Capacity Stripping Matrix
Floor maintenance technicians use this 15 Gallon unit behind floor scrubbers to capture caustic wax emulsions and rinse water. The tip-and-pour cart frame aids disposal when gravity drains run slow.
- 15 Gallon structural polyethylene canister rejects chemical corrosion and impacts without denting
- 1.6-horsepower bypass commercial motor delivers 100 CFM and 90-inch static water lift
- Rear-mounted flexible drain hose directs waste liquid straight into floor-level sinks or drains
- Internal float shutoff terminates suction when wastewater reaches capacity to protect motor stages
- Steel transport cart with wide rear wheels rolls over threshold obstacles without tipping
- Washable cloth primary filter allows fast transition from wet recovery to dry sweep cleanup
- Complete contractor toolkit includes commercial floor squeegee, wands, hose, and detail attachments
Dyno Thermal Bench Telemetry
Current draw pulls 10.4 Amps on standard 120 Volt circuits under continuous loaded liquid extraction. Motor housing temperatures climb 40°F over room ambient after 45 minutes of floor stripping recovery. Exhaust air venting measures 118°F during deep water lift pulls through a loaded floor squeegee. Static water lift drops 7-inch water lift across a standard 10-foot commercial hose. Sound meters track 69 dBA at 10 feet under open airflow, peaking at 73 dBA under full seal.
Floor Maintenance Service Directives
The balanced cart frame rolls over threshold transitions without hang-ups, but tipping the loaded 120-pound tank to dump thick wax sludge demands firm physical control. Environmental crews collecting hazardous lead dust or silica should not buy this model, because non-HEPA cloth filtration allows fine particles to escape into breathing zones. Sucking hot boiler ash or burning welding slag will melt through the cloth filter and ignite the tank.
- Rinse the tank interior and float cage after every wax stripping shift to stop sticky buildup
- Inspect the drain hose plug gasket once per week to prevent vacuum leaks that sap lift
- Blow out the dry cloth filter using low-pressure compressed air under 30 PSI
Commercial Warranty Carton Manifest
Powr-Flite covers this machine with a 1-Year commercial warranty on motor and electrical components. The package contains the 15 Gallon polyethylene vacuum, transport cart, drain hose, 10-foot commercial suction hose, two-piece wand, floor squeegee, hard floor tool, and cloth filter.