Description
Raise construction materials with Werner 60′ Material Hoist equipment when confined-space work requires 450-lb capacity and a long cable run. Experienced contractors gain controlled material movement during roofing, framing, and elevated installation, but can the hoist be used for people simply because it reaches a high work point? Its steel base, 3/16-inch galvanized steel cable, and 60-foot travel support material lifting only, with personnel use specifically prohibited.
Model T510045 weighs 30 lbs and measures 18 inches high, 12 inches wide, and 9.6 inches long. The unit uses a 60-foot galvanized steel cable lifeline and is designed for confined-space material handling. Werner identifies ANSI A10.5 and OSHA standards compliance. The T510000B mounting bracket is required for mounting onto the Tripod 9 and is sold separately according to the product listing.
Features of Werner Hoist
Roofing crews, construction contractors, maintenance teams, and confined-space workers need a compact material hoist for moving tools and supplies to elevated locations. Trained users can operate this Werner hoist when the mounting bracket, cable, load path, and 450-lb limit are verified.
- 450-lb capacity supports compatible roofing, framing, and construction materials.
- 60-foot cable length reaches elevated work areas and confined installation points.
- 3/16-inch galvanized steel cable provides the listed lifting-line construction.
- Steel base supports the material-hoist frame during approved operation.
- Confined-space application supports material movement where larger equipment cannot fit.
- ANSI A10.5 compliance is listed for the material-hoist configuration.
- OSHA compliance is identified in the product information.
- T510000B mounting bracket is required for Tripod 9 installation and sold separately.
Load Test Cable Control
No independent proof-load result, cable elongation test, brake-holding measurement, mounting-deflection test, lifting-speed value, or field telemetry was supplied. Do not treat 450 lbs as a proof load or use the cable rating for personnel support. Damaged cable, incorrect mounting, shock loading, side loading, unstable tripod placement, and overloaded material can compromise the hoist system.
Operation Limits Service
The 60-foot galvanized cable, steel base, confined-space format, and Tripod 9 mounting system support material lifting at construction sites. This hoist is material-only; personnel lifting is prohibited. Do not exceed 450 lbs, operate without the required mounting hardware, or stand beneath suspended materials.
- Inspect the galvanized cable for broken strands, kinks, corrosion, bird-caging, and crushing.
- Check the mounting bracket, tripod connection, cable path, base, and load attachment before use.
- Keep workers outside the suspended-load zone and remove the hoist after cable damage.
Warranty Compliance Contents
Werner lists a 1-Year Limited Warranty for model T510045. Package contents identify the 60-foot material hoist, while the T510000B mounting bracket is sold separately. Confirm current warranty terms, tripod compatibility, mounting hardware, instructions, cable specifications, and applicable ANSI A10.5 and OSHA requirements before commercial use.