Description
Pump standing water out of aircraft float compartments without hand bailing. The Turbo Seaplane Float Pump with 2 invasive species filters provides portable bilge clearance for pilots. A standard cordless drill powers the high-output flexible impeller pump. Pumping volume slows down when lifting mud slurries containing heavy sand grit.
Precision-machined aluminum forms the pump body, housing a chemical-resistant flexible rubber impeller. The drive arbor connects straight to standard cordless drill chucks without shaft adapter slippage. Dual fine-mesh invasive species filter screens stop lake zebra mussels from spreading between water bodies. Flexible clear vinyl suction tubing snakes through tiny seaplane float inspection ports. Compact carry bags hold accessories.
Aviation Bilge Pumping Hardware Details
Bush pilots drain aircraft float compartments during pre-flight checks without manual hand pumps. Dual invasive species filters protect pristine waterways from cross-contamination.
- Universal half-inch drive arbor connects straight to commercial cordless drill chucks
- Flexible impeller pump moves 12 GPM to clear aircraft float bays within minutes
- Dual invasive species filter screens block transfer of destructive aquatic larvae
- Flexible clear suction hose snakes down tight aircraft inspection access ports
- Corrosion-resistant aluminum pump head withstands harsh marine saltwater exposure
- Standard garden hose discharge fitting directs pumped bilge water away from aircraft
- Heavy nylon storage bag organizes pump head, filter screens, and suction hoses
Hydrodynamic Bench Telemetry Data
Bench testing confirms the pump draws 12.4 GPM at 1800 RPM drill speed across a 4-foot suction lift. The flexible rubber impeller creates 14 inches of vacuum suction within 4 seconds. Seal friction remains low with zero shaft binding after continuous testing. Acoustic meters record 71 dBA at the operator hand position.
Worksite Performance Practical Notes
You chuck the drive arbor into your cordless drill chuck with hand pressure. The clear intake line allows visual monitoring of air bubbles during float pumping. Do not run this flexible impeller pump dry for longer than 15 seconds. Operating dry creates frictional heat that burns rubber impeller vanes.
- Inspect the fine filter screen for trapped weeds before inserting into float bays
- Rinse the pump with fresh water after pumping brackish coastal seawater
- Lubricate the rubber impeller with silicone spray prior to winter aircraft storage
Factory Warranty Coverage Roster
Turbo Seaplane covers the pump head with a 1-Year warranty against manufacturing defects. The kit includes the machined pump head, 2 invasive species filter screens, suction hose, discharge adapter, and storage bag.
