Description
Restore continuous lifting power to commercial material hoists hauling heavy turf equipment up steep tracks. The Tranzsporter Electric Motor for TP400 and TP250 hoists delivers reliable 1.5 HP driving torque through standard electrical outlets. This commercial replacement motor powers drive winches. It requires a dedicated 115V 15A electrical circuit to prevent power breaker trips.
A heavy-duty totally enclosed fan-cooled steel motor housing seals out rain, dust, and abrasive jobsite debris. High-torque copper motor windings resist thermal overload during continuous lifting cycles under maximum rated loads. Heavy-duty electrical capacitors provide high starting torque to get stalled hoist carriages moving from dead stops. The integrated manual reset thermal breaker protects electrical components from severe motor overheating.
Key Features of Tranzsporter 12561A
Commercial contractors and maintenance facilities use this motor to replace burned power heads on material hoists. The electric drive eliminates small engine exhaust in enclosed shop bays.
- 1.5 HP electric motor output supplies constant winch drum torque for material hoists
- 115-volt single-phase electrical operation connects to standard jobsite generator power
- Totally enclosed fan-cooled enclosure blocks moisture and turf debris from internal windings
- Dual heavy-duty capacitors supply high starting torque under full mechanical loads
- Thermal overload reset button interrupts power before windings suffer heat damage
- Keyed output drive shaft mates with standard Tranzsporter winch gearboxes
- Industrial rubberized power cord resists oil degradation and mechanical cuts on jobsites
Electric Motor Dyno Performance Telemetry
Dynamometer bench testing records 1.5 continuous HP output at 1725 RPM under full mechanical load. Starting current draw peaks at 42 amps for 0.4 seconds before settling to an 11.2 amp running draw. Motor shell temperature stabilizes at 148 degrees Fahrenheit after two hours of continuous cycling. Acoustic sound levels measure 68 dBA at 3 feet from the motor housing. Internal winding insulation maintains Class F thermal standards up to 311 degrees Fahrenheit.
Motor Wiring Guidelines Negative Application Bounds
Plug the motor cord into a 12-gauge heavy-duty extension cord measuring under 50 feet to eliminate voltage drop problems. Align the motor drive shaft keyway with the winch gearbox coupling before tightening mounting bolts. Do not use this electric motor in hazardous locations containing flammable fuel vapors.
- Cooling fan air intake shroud requires dry brush cleaning to clear out grass clippings
- Motor shaft keyway requires anti-seize compound before mating with winch gearboxes
- Capacitor cover gasket requires visual checks every season to keep water out
Tranzsporter Motor Warranty Manifest Details
Tie Down Engineering provides a 1-Year commercial warranty against electrical winding and mechanical defects. The carton includes the 1.5 HP electric motor, starting capacitors, drive shaft key, power switch cord, and installation wiring guide.