Description
Climbing ladders with running chainsaws to prune high tree branches creates severe fall hazards on damp residential lawns. The Stihl 10 In. Bar 36V Cordless Telescopic Pole Pruner extends operator reach from stable ground with a telescoping shaft up to 13 feet long. It features a 10-inch guide bar. Full extension balance requires steady two-handed control.
A commercial brushless motor mounts inside a die-cast magnesium housing that channels heat away from sensitive electronic speed controllers. The telescoping outer tube features rigid square aluminum tubing with an integrated clamping collar to eliminate shaft twist under limb weight. The oiler system uses an automatic mechanical pump that feeds bar oil straight to the 1/4-inch Stihl PICCO micro-chain.
Telescopic Pole Pruning Hardware Architecture
Telescopic reach allows operators to prune overhead tree branches up to 16 feet high without leaving the turf. The compact magnesium cutting head includes a branch hook to pull severed limbs out of thick canopies.
- 36 Volt commercial brushless motor generates high chain speed for clean limb cutting without bark tearing.
- Telescoping aluminum shaft extends overall length from 8.8 feet up to 13 feet with a positive locking collar.
- 10-inch guide bar with 1/4-inch PICCO micro-chain cuts through hardwood branches up to 8 inches thick.
- Die-cast magnesium cutting head includes an integrated branch hook to dislodge hung-up pruned limbs.
- Translucent bar oil reservoir features a captive cap for clean field refilling without oil spills.
- Side-access chain tensioning screw allows fast chain adjustments without removing the sprocket cover.
- Bare tool setup connects straight to Stihl AP battery belts or AR backpack battery packs.
Brushless Motor Cutting Bench Telemetry
Severing 6-inch green oak branches at full extension draws 24 Amps from a 36 Volt AP 300S battery at 4800 RPM chain speed. Motor casing temperature stabilizes at 126°F after 35 minutes of continuous limb pruning. Chain cutting drag absorbs 780 Watts of electrical power during deep wood cuts. Operating acoustic noise measures an ultra-quiet 76 dBA at the operator position.
High Reach Pruning Bounds Fleet Directives
Commercial arborists, municipal tree crews, and orchard managers prune high tree canopies fast with this telescoping pole saw. Do not operate this pole pruner within 50 feet of energized overhead electrical power lines because aluminum tubes conduct electricity. Never drop severed tree branches directly onto the telescoping shaft tube.
- Check chain tension before every cutting shift and maintain 1/8-inch clearance off the guide bar rails.
- Top off the bar oil tank each time you insert a fresh battery pack into the battery dock.
- Clean wood chips and sawdust out of the drive sprocket cavity after each commercial work shift.
Commercial Warranty Equipment Shipment Roster
Stihl covers this cordless pole pruner with a 2-Year commercial warranty covering the brushless motor, telescoping shaft, and oiler assembly. The bare tool package includes the telescopic pole pruner, 10-inch guide bar, 1/4-inch PICCO chain, bar scabbard, and manual.
