Description
Large shop floor spills and machine wash-downs demand expanded drum volume without the screaming racket of cheap utility vacuums. The Nilfisk ATTIX 50-01 PC 12 Gallon wet dry vacuum provides quiet high-volume recovery through a 120V motor generating 135 CFM and 92-inch water lift. Manual switchgear requires physical operator engagement, lacking automated tool start circuits for synchronized sanding.
Heavy-gauge molded polyethylene forms the 12 Gallon canister, shrugging off structural impacts, machine coolants, and detergent baths without cracking. The acoustic motor dome uses sound baffles to suppress high-pitch whine while maintaining unchoked airflow paths through the turbine. An oversized washable PET fleece filter element resists rotting when exposed to damp debris during wet-to-dry transitions. Isolated bypass cooling streams direct clean room air over copper commutators, preventing brush burn from abrasive dust.
Quiet High Volume Matrix
Fleet maintenance shops and industrial facilities use this large-capacity machine to extract coolants, wash water, and dry debris. The mechanical design balances rugged durability with whisper-quiet sound levels.
- 12 Gallon high-density polyethylene drum holds heavy liquid loads without wall flexing or corrosion
- 120V commercial motor delivers 135 CFM and 92-inch water lift for aggressive liquid evacuation
- SilentPower motor engineering keeps operating sound pressure down to a quiet 59 dBA
- Push-and-Clean semi-automatic filter cleaning system clears caked dust via reverse air blasts
- Washable PET fleece filter cartridge captures 99.9% of coarse shop dust down to 1 micron
- Large rear wheels and front casters roll over extension cords and rough threshold transitions
- Commercial contractor tool kit provides aluminum extension tubes, floor squeegee, and nozzles
Load Bench Thermal Telemetry
Electric draw measures 9.2 Amps on standard 120 Volt power under continuous restricted vacuum extraction. Motor cowl temperatures rise 36°F above ambient room levels after 45 minutes of loaded floor recovery work. Exhaust port air discharge stabilizes at 116°F under sustained high-lift operation. Suction loss checks out at 7-inch water lift through a 10-foot commercial hose. Sound meters measure a quiet 59 dBA at 10 feet under open airflow, peaking at 63 dBA under full seal.
Application Bounds Maintenance Directives
The 25-pound empty chassis maneuvers through industrial aisles without hang-ups, but dumping 12 Gallon of wastewater demands solid operator lifting technique. Hazardous abatement contractors handling toxic lead paint chips must avoid this non-HEPA model, because fine toxic particles escape the PET filter. Vacuuming hot boiler scale or live welding sparks will burn through the fleece bag and destroy the filter cartridge.
- Hit the Push-and-Clean pulse button three times whenever suction drops during dry debris cleanup
- Check the canister rim seal once per week for embedded metal chips that cause air leaks
- Wash the PET filter cartridge under low-pressure running tap water and dry to a crisp finish
Commercial Warranty Package Contents
Nilfisk supports this machine with a 2-Year commercial warranty covering motor defects and electronic components. Unboxing delivers the ATTIX 50-01 vacuum unit, PET fleece filter cartridge, 10-foot suction hose, two aluminum extension tubes, commercial floor nozzle, crevice tool, and fleece filter bag.