Description
Basement floods and broken water mains flood basements faster than standard shop vacuums can drain. The NaceCare Solutions WVD 1800P 899722 pairs a 1600W dual-motor powerhead with an internal continuous discharge pump for nonstop water evacuation. Weight scales hit 88 pounds dry, making solo vehicle loading difficult for lone service operators.
Twin 800W motor stages work parallel to generate 160 CFM and 90-inch static water lift through an aluminum housing array. An internal submersible sump pump sits bolted inside the lower 20 Gallon Structofoam drum floor, pushing water out under positive head pressure. The Structofoam tank wall measures over 1/4-inch thick, dampening internal fluid cavitation noises while surviving mechanical impacts. Heavy-gauge rubberized gaskets seal the motor deck against the drum under heavy suction pull.
Continuous Discharge Hardware Matrix
Disaster recovery teams deploy this continuous-pumping vacuum to suck up and eject dirty floodwater in one fluid motion. The dual-motor array clears flooded basements without work stoppages for bucket dumping.
- 1600W dual-motor package delivers 160 CFM of high-volume airflow across broad flooded surfaces
- Internal submersible sump pump discharges liquids continuously through a standard garden hose connection
- 20 Gallon Structofoam recovery drum prevents chemical degradation from dirty flood residues
- Wide 29-inch front-mount squeegee covers extensive floor spans in commercial warehouses
- C3A toolkit provides commercial extension pipes and specialized wet recovery floor heads
- Submersible pump float switch actuates evacuation automatically without operator intervention
- Dual independent motor power switches allow single-motor operation for low-amperage breakers
Sump Motor Load Telemetry
Both vacuum motors running alongside the internal sump pump pull 14.8 Amps on a 120 Volt circuit under full load. Motor cap metal temperatures elevate by 51°F after 45 minutes of heavy continuous pumping. Exhaust air venting reaches 128°F when pumping dense mud slurries through the internal screen. Vacuum drop remains low at 6-inch water lift across the 29-inch squeegee shoe. Decibel meters record 74 dBA at 10 feet during dual-motor operation, rising to 77 dBA when the discharge pump activates.
Jobsite Mechanics Maintenance Rules
Large rear transit wheels roll over mud, but the heavy chassis requires ramp systems to load into pickup trucks. Do not purchase this system for dry drywall sanding dust cleanup because the wet pump interior lacks dry cyclone separation. Fibrous debris, carpet strings, and thick gravel will choke the internal submersible impeller and trip thermal overload switches.
- Clear the internal submersible pump intake screen after every flood remediation contract
- Flush the internal check valve with clean tap water to remove trapped sand particles
- Verify float switch freedom of movement before leaving the machine running unattended
Warranty Specs Package Contents
The vacuum motor carries a 2-Year warranty while the Structofoam tank features a 10-Year replacement guarantee. Package unboxing yields the 20 Gallon vacuum, internal submersible discharge pump, C3A tool set, 29-inch front-mount squeegee, suction hose, and brass discharge fittings.