Description
Blown motor switches and gear case lockups ruin reciprocating saws when cutting thick cast iron soil pipes during commercial plumbing overhauls. The Milwaukee M18 FUEL SAWZALL Reciprocating saw with ONE-KEY delivers customizable cut control through a brushless motor and wireless tool tracking. Aggressive orbital plunge cuts through steel decking deplete five-amp-hour batteries within ten minutes of continuous demolition.
An all-metal gear case houses a balanced planetary drive mechanism that converts brushless motor rotation into 1-1/4-inch reciprocating strokes. The internal ONE-KEY wireless module communicates with smartphone software to program custom motor speeds and blade braking parameters for distinct metal alloys. A rubber-sealed gear housing protects needle roller crank bearings against abrasive drywall dust and water spray, while a spring-loaded QUIK-LOK blade clamp permits single-handed blade swaps.
Programmable Reciprocating Drive Hardware Metrics
Demolition contractors require massive cutting speed through wood framing studs without suffering severe white-finger vibration trauma. ONE-KEY electronic controls allow custom stroke speed tuning to prevent tooth strip on hard metals.
- 18-volt brushless motor delivers up to 3000 strokes per minute to sever cast iron, wood, and steel
- ONE-KEY wireless tool tracking and customized stroke speed presets optimize metal cutting performance
- 1-1/4-inch stroke length drives tooth gullets through thick stock to clear chips in single passes
- QUIK-LOK keyless blade clamp ejects broken hot blades without direct operator hand contact
- Adjustable shoe mechanism shifts forward to utilize unbent teeth along the entire blade shank length
- Anti-vibration handle dampens recoil energy to minimize worker wrist and arm fatigue on demolition runs
- Two 5.0 Ah XC battery packs provide sustained high-current output through tough commercial jobs
Bench Load Telemetry Amperage Draw
Idle motor draw averages 3.2 amps DC from the 18-volt platform. Forcing a carbide-tipped thick metal blade through four-inch commercial schedule 80 steel pipe increases discharge current to 28.4 amps while stroke speed holds at 2650 strokes per minute. Gear housing temperature remains under 118 degrees Fahrenheit during prolonged pipe sectioning. Operating noise peaks at 86 dBA under heavy metal friction.
Field Service Trade-Offs Application Filter
Do not use this demolition saw for fine cabinet scroll work or precision veneer plunge cutting. Operators who twist the blade inside deep pipe cuts snap the reciprocating shaft and strip internal drive pins. Blow metal grit out of the QUIK-LOK blade clamp mechanism using compressed air each shift. Inspect the rubber front boot for cuts and oil leaks at the close of work. Store lithium battery packs inside dry climate-controlled tool trailers.
Warranty Protection Standard Package Items
A 5-Year limited warranty covers the reciprocating saw chassis while a 3-Year warranty protects the battery packs. The kit includes the ONE-KEY SAWZALL, two 5.0 Ah batteries, multi-voltage charger, bi-metal blade, and heavy-duty plastic carrying case.
