Description
Crowded workbenches and assembly stations lose efficiency when loose air hoses clutter technician workspaces. The Milton Hose Reel 1/4in ID reel provides neat overhead air supply across 25 feet of weather-tough EPDM hose at 300 PSI. Fitted with 1/4-inch NPT fittings, it runs blow guns. The internal spring slips if retracted without tension control.
Milton builds the support frame and side flanges from heavy stamped plate steel protected by an industrial powder finish. The rotary air union features solid brass construction to resist corrosion from trapped air line moisture. An enclosed tempered steel clock spring provides uniform recoil tension across the entire 25-foot hose payout. Four non-snag roller guides prevent sharp bending, protecting the outer EPDM rubber cover from abrasion during off-angle tool operation.
Field Hardware Performance Matrix
Small equipment repair benches and precision mechanical stations require compact air line storage without heavy bulk. Weather-resistant EPDM rubber and solid brass fittings ensure dependable pneumatic energy for precision hand tools.
- 25-foot 1/4-inch inner diameter EPDM rubber air hose remains flexible from minus 40°F to 190°F.
- 300 PSI maximum working pressure delivers reliable pneumatic energy for tire chucks, blow guns, and nailers.
- 1/4-inch male NPT brass fittings connect to standard benchtop pneumatic tools and quick couplers.
- Solid brass swivel joint prevents corrosion while delivering leak-free rotary fluid transfer.
- Spring-loaded ratchet pawl secures hose at desired lengths to relieve wrist tension during bench work.
- Dual-arm steel mounting base secures the reel to workbench legs, tool cart frames, or wall studs.
- Molded rubber hose bumper stop holds the tool end at the desired resting reach height.
Dyno Load Realities Heat Data
Bench pull tests record 5.0 pounds of initial extraction effort, increasing to 10.5 pounds at full 25-foot extension. Flow testing reveals a minor 4.8 PSI line drop while delivering 20 CFM at 90 PSI to small pneumatic tools. The enclosed spring motor completes 8000 consecutive recoil cycles without loss of spring tension or pawl slippage. Thermal testing confirms the EPDM hose compound withstands 180°F temperatures without wall softening. Operating noise checks in at 60 dBA at 3 feet distance.
Field Service Application Limits
Weighing 20 pounds, this compact unit mounts with four 5/16-inch bolts onto light shop framing. Do not connect this 1/4-inch hose line to large 1/2-inch impact wrenches or high-CFM sanders. The narrow 1/4-inch inside diameter chokes air volume, reducing heavy air tool torque by more than 40 percent.
- Drain moisture from the main shop air line filter every week to protect the brass swivel.
- Inspect the outer EPDM hose cover for deep gouges or abrasion before starting bench work.
- Check mounting base hardware for tightness every 200 operating hours to maintain firm mounting.
Commercial Warranty Package Inventory
Milton covers this compact hose reel with a 1-Year commercial warranty against defects in materials and craft. The package includes the steel hose reel unit, 25 feet of installed 1/4-inch EPDM hose with 1/4-inch NPT fittings, a solid rubber hose stop, and an illustrated installation manual with mounting dimensions.