Description
Scrub grime, algae, and loose mud off jobsite equipment between tasks. The Mi T M ChoreMaster 3000 PSI cold water washer provides reliable maintenance pressure. A direct-drive axial pump connects to a 212cc Mi T M OHV gas engine. This direct-drive machine requires pressurized tap water because unpressurized suction lines cause pump cavitation.
A powder-coated 1-inch steel tube frame supports the engine and pump group. Vibration dampers isolate the 212cc OHV gas engine to protect frame weld joints. The aluminum axial pump head houses stainless steel pistons that cycle inside precision-machined water chambers. A thermal relief valve expels scalding water during trigger bypass delays to preserve internal packings. Flat-free 10-inch tires prevent worksite puncture downtime.
Axial System Component Specs
Contractors wash landscape trucks and stone walkways with portable hydraulic force. The balanced upright cart clears narrow garden gates without scraping side posts.
- Gas 212cc OHV engine maintains consistent shaft torque throughout routine washing cycles
- Direct-drive axial cam pump produces 3000 PSI at 2.3 GPM fluid delivery
- Aluminum pump manifold features thermal protection to prevent overheat damage
- Solid 10-inch puncture-proof tires roll over scrap nails without flat tire delays
- Built-in wand bracket holds the spray lance secure during transport across sites
- Three quick-connect spray tips swap stream angles for distinct surface prep tasks
- Steel wire-braided 25-foot hose withstands repeated dragging over rough tarmac
Dynamometer Bench Testing Data
Dyno testing confirms 3490 RPM engine speed under maximum 2950 PSI operational resistance. Fluid flow stabilizes at 2.26 GPM through the included size 030 spray tip. Sump oil temperature climbs to 184°F after 2 continuous operating hours on open pavement. Fuel consumption registers 0.51 GPH at full operational throttle. Sound telemetry indicates 87 dBA at 5 meters distance from the engine muffler.
Jobsite Application Target Limits
You tilt this compact cart backward to clear curbs with minimal hand strain. The low overall weight permits single workers to load the frame into vans. Do not assign this axial washer to 8-hour paint stripping jobs on commercial structures. Axial pumps overheat under continuous industrial duty cycles and suffer premature check valve failure.
- Inspect engine oil levels before pulling the recoil starter rope each morning
- Flush garden supply lines before attaching water hoses to block fine sediment
- Inject pump anti-freeze storage fluid into pump ports before winter freezing periods
Factory Warranty Coverage Details
Mi T M covers the OHV engine with a 1-Year limited warranty and the axial pump with a 1-Year warranty. The retail shipping box contains the upright cart washer, 25-foot pressure hose, spray gun, steel lance, 3 quick-connect tips, and the complete operator instruction manual.