Description
Punch-out carpenters waste billable minutes dragging heavy corded vacuums for minor hinge mortise shavings. The Makita XLC01ZB 18V LXT Lithium compact vacuum provides quick bare-tool cleanup powered by standard 18V batteries. It pulls 46 CFM through a bagless collection canister. Coarse jobsite wood chunks or nails will jam the non-motorized floor nozzle throat.
The outer housing uses impact-modified ABS thermoplastic designed to survive drops onto subfloors and gang-box storage. A high-speed brushed motor turns a composite centrifugal fan wheel inside an isolated chamber. Debris passes through a two-stage cloth and nylon filter basket that traps drywall dust before entering the fan intake. A spring-loaded push-button power switch seals behind an elastomeric membrane to prevent fine plaster dust from fouling electrical contacts.
Compact Bare Vacuum Hardware
Technicians carry this lightweight stick chassis between service vehicles and interior workstations without power cords. Push-button controls select between high and low power modes to conserve battery life.
- 18V brushed motor produces 46 CFM of airflow and 20 inches of water lift.
- 2-speed push-button power switch toggles between high suction and extended runtime.
- Bagless 0.65-liter collection capsule twists open for fast trash-can dumping.
- Dual-stage cloth and nylon filtration traps drywall grit without paper replacement bags.
- Angled floor suction nozzle maintains floor contact without an extension pipe.
- Ergonomic soft-grip handle reduces technician wrist strain during overhead cleaning passes.
- Aluminum extension wand clicks into place with a mechanical push detent.
Bench Dyno Load Telemetry
Continuous operation on high power draws 8.8 Amps from an inserted 18V 5.0 Ah battery pack. Motor armature velocity reaches 19500 RPM, maintaining 19 inches of static water lift across a clean filter. Motor casing temperatures climb by 27°F over a 25-minute continuous run, leveling at 122°F. Sound meter instrumentation reads 71 dBA at 1 meter distance on high power. Airflow holds steady at 45 CFM until the cloth filter basket collects a heavy dust cake.
Shop Handling Field Boundaries
At 2.6 pounds bare, this compact vacuum eliminates technician arm strain during overhead register cleaning. Do not deploy this bare vacuum for wet plumbing leaks, mortar slurry, or metal grinding sparks. Ingesting liquids destroys the cloth filter basket and shorts the brushed motor commutator.
- Twist and dump the debris capsule whenever dirt passes the halfway line.
- Wash the cloth pre-filter in warm water every two weeks and dry for 24 hours.
- Clear carpet threads and hair from the floor nozzle swivel joint every week.
Warranty Terms Unboxing Manifest
Makita covers the XLC01ZB bare compact vacuum with a 3-Year commercial warranty against defects in motor assemblies and switch mechanisms. The unboxing package contains the bare vacuum tool, an extension wand, a floor nozzle, a crevice nozzle, and a washable cloth filter assembly.