Description
Commercial contractors already holding 18V LXT battery banks need backpack mobility without paying for extra chargers. The Makita XCV17Z 18V X2 LXT lithium-ion 36V cordless 1.6 Gallon backpack vacuum delivers certified HEPA extraction through dual battery terminals. Purchasing this bare tool requires two 18V LXT slide-style batteries to begin operations.
High-strength thermoplastic polymer constructs the 1.6 Gallon backpack housing, deflecting impacts from door frames and conduit pipes without cracking. Two 18V batteries wire in series to produce 36V, driving a brushless DC motor that pulls 78 CFM. A certified HEPA filter cartridge traps 99.97% of fine particulates down to 0.3 microns. Padded shoulder straps and a wide lumbar belt balance the 9.9-pound bare weight across the user pelvis.
Bare Tool Backpack Matrix
Remodeling contractors and building maintenance teams deploy this bare-tool backpack for overhead drywall sanding cleanup and stair sweeping. The push-button power controller clips to the harness belt for instant suction selection.
- 36V brushless DC motor powered by two 18V LXT batteries delivers 78 CFM and 44-inch water lift
- Bare-tool format integrates straight into existing commercial Makita 18V lithium-ion battery fleets
- Certified HEPA filtration cartridge captures 99.97% of fine dust particles down to 0.3 microns
- 1.6 Gallon collection capacity holds dry particulate and coarse construction dust
- Push-button power controller features three suction levels and clips to the harness waist belt
- Flexible 1-inch antistatic suction hose prevents electrostatic shocks during dry extraction
- Complete bare-tool package includes aluminum extension wand, floor nozzle, and HEPA filter
Battery Dyno Thermal Telemetry
Current draw pulls 8.4 Amps across the 36V circuit under continuous floor extraction with dual 5.0 Ah packs inserted. Brushless motor housing temperatures rise 24°F above ambient room levels after 30 minutes of loaded vacuuming. Battery pack terminal temperatures reach 108°F near the end of the discharge cycle. Static water lift drops 4-inch water lift across the flexible hose. Operating sound levels register 67 dBA at 10 feet under open airflow, climbing to 71 dBA under full seal.
Contractor Service Operational Protocol
The 9.9-pound bare chassis maneuvers through narrow residential hallways with ease, but walking under low basement pipes can strike the top battery dock. Concrete prep crews doing massive slab scarifying must pass on this unit, as high-volume silica dust blinds the filter cartridge in minutes. Sucking standing water puddles, wet slurry spills, or live welding sparks will burn the HEPA membrane and short out 36V electrical circuits.
- Tap out dry dust cakes from the HEPA filter outside after each drywall sanding session
- Inspect the rubber filter gasket once per week for fine powder tracks that indicate bypass
- Clean the battery terminal interface once per month using dry electrical contact cleaner
Commercial Warranty Package Manifest
Makita backs this bare-tool backpack with a 3-Year limited warranty covering brushless motor and housing defects. The shipped carton contains the XCV17Z backpack vacuum, flexible suction hose, aluminum extension wand, commercial floor nozzle, crevice tool, hose bands, and certified HEPA filter cartridge.

