Description
Trimming tall foundation plantings with step ladders slows down hedge shearing routes and creates severe fall risks on damp lawns. The Husqvarna 525iHF3 25.59 Inch 36V Battery Pole Hedge Trimmer gives commercial groundskeepers high-speed blade action to trim tall hedges from the ground. It features a 26-inch cutter bar. Overhead reach balance requires two hands on the rigid shaft.
A commercial-grade brushless motor mounts inside a cast-aluminum gear housing to dissipate heat during sustained reciprocal cutting cycles. The cutter bar utilizes double-sided laser-cut, hardened alloy steel teeth ground on three sides to slice clean through fibrous ornamental wood. The fixed-length aluminum drive tube encloses a solid steel shaft supported by self-lubricating polymer bushings that isolate torsional vibration.
High Reach Fixed Shaft Trimming Matrix
Fixed shaft geometry provides the structural rigidity needed to maintain straight, level hedge lines along expansive commercial building walls. The high blade speed leaves sheared surfaces crisp without tearing bark.
- 36 Volt commercial brushless motor generates cutting power comparable to a 25 cc professional gas trimmer.
- 26-inch double-sided cutting bar provides broad surface coverage on tall vertical hedge faces.
- Fixed structural aluminum shaft extends operator ground reach to trim hedge tops up to nine feet high.
- Laser-cut, three-sided ground steel cutting teeth stay sharp through dirty bark and thick stems.
- Cast-aluminum gearbox housing sheds mechanical friction heat under continuous high-RPM running.
- Ergonomic loop handle with textured overmold provides firm control during high overhead sweeping passes.
- IPX4 weatherproof construction allows commercial trimming operations in light rain and wet morning foliage.
Brushless Motor Load Bench Telemetry
Trimming woody privet hedges at full blade speed draws 17.5 Amps from a 36 Volt BLi300 battery at 4400 cuts per minute. Gear housing surface temperature stabilizes at 122°F after 40 minutes of uninterrupted hedge shaping. Blade mechanical drag consumes 610 Watts under steady branch contact. Operating acoustic emissions measure an ultra-quiet 78 dBA at the operator ear position.
Commercial Route Envelopes Fleet Directives
Commercial landscapers and corporate campus maintenance staff shape tall privacy hedges and foundation plantings fast with this battery pole trimmer. Do not use this tool to cut woody tree limbs thicker than 1-inch because thick wood will jam the high-speed teeth. Never store lithium battery packs inside damp unheated tool trailers during sub-freezing winter months.
- Apply resin-dissolving blade spray cleaner to the cutter teeth before and after each trimming shift.
- Pump high-temperature gear grease into the aluminum gear housing grease port every 50 hours of use.
- Wipe moisture and plant sap from the battery connection terminals with a clean dry towel each morning.
Equipment Guarantee Commercial Delivery Manifest
Husqvarna provides a 2-Year commercial warranty covering the brushless motor, drive shaft, and gear drive assembly. The bare tool package includes the 525iHF3 pole hedge trimmer, 26-inch cutter bar with installed blades, full-length blade scabbard, and instruction manual.
