Description
Commercial electrical crews face blown fuses and stalled pulls when pulling heavy copper feeders through long conduit runs. The Greenlee G6TURBO6000 LbsCable PullerwithFloorMount anchors to concrete shop floors to pull heavy electrical conductors without pulling-rig deflection. Sized for industrial wire pulls, it yields 6000 pounds of pull force. It requires concrete slab anchoring before every setup.
The structural frame utilizes heavy-gauge welded tubular steel with a floor-mount baseplate drilled for concrete drop-in wedge anchors. An industrial electric motor couples direct to a heavy-duty right-angle hypoid gearbox, transferring high torque to a knurled steel capstan drum. Cable friction generates extreme drum heat. This dual-speed capstan features induction-hardened steel surfaces that resist grooving and heat glazing under intense synthetic rope friction during long commercial pulls.
Cable Puller Hardware Performance Matrix
Commercial electricians pull heavy feeder conductors through complex multi-bend conduit runs. Dual-speed controls balance rapid wire feeding with high-torque pulling power.
- 6000-pound maximum pulling capacity handles heavy copper commercial feeder cables without motor stall.
- Dual-speed capstan drum pulls at 12 FPM on high load and 30 FPM on light wire runs.
- Right-angle hypoid gearbox transfers motor power without chain drive maintenance or slip hazards.
- Solid floor-mount baseplate bolts into concrete slabs to prevent machine kick-out under maximum pulling tension.
- Integrated force gauge displays real-time line tension to prevent exceeding conduit or conductor limits.
- Circuit breaker protection stops motor operation before electrical stator windings overheat during extreme pulls.
- Compact frame layout fits through standard commercial jobsite doors on integrated transport wheels.
Dyno Telemetry Electrical Bench Testing
Current draw under a sustained 6000-pound line pull measures 14.2 Amps on standard 120-Volt 20-Amp circuits. Capstan drum temperatures rise 58°F above ambient after pulling 400 feet of heavy conductor cable at 12 FPM. Gearbox oil sump temperatures stabilize at 142°F under full continuous load. Operating acoustic output registers 76 dBA measured 5 feet from the motor housing. Line pull force holds steady within 2 percent variance across continuous five-minute pull cycles on commercial test benches.
Jobsite Service Operation Work Boundaries
Never operate this cable puller without securing the floor mount baseplate with certified wedge anchors in 3000 PSI concrete. Do not purchase this puller for continuous vertical mine shaft hoisting where dedicated hoist brakes remain mandatory. Dirty pulling ropes cause rapid capstan grooving and fiber slip.
- Inspect the knurled capstan drum per week for rope glaze or metal burrs that shred pulling lines.
- Check concrete anchor bolt torque to ensure 85 foot-pounds before applying line tension.
- Replace gearbox synthetic lubricant every 250 operating hours to maintain hypoid gear mesh life.
Factory Warranty Heavy Package Inventory
Greenlee backs this cable puller with a 1-Year commercial warranty covering the electric drive motor, gearbox, and structural frame welds. The shipping container holds 1 G6 TURBO cable puller, 1 concrete floor mount baseplate, 1 heavy-duty footswitch control, and 1 complete operational manual.