Description
Voltage drop across long jobsite cords starves portable table saws and burns motor brushes. The FLEX 24V 10 Inch Table Saw Stacked Lithium Kit delivers cordless jobsite ripping with a high-power brushless motor spinning at 4500 RPM. This 24-volt cordless table saw requires high-capacity Stacked Lithium battery packs and will not run on standard 18-volt platforms.
The structural chassis incorporates a heavy-duty steel tube roll cage surrounding a precision-machined cast aluminum tabletop. A high-torque brushless direct-drive motor couples to the carbon steel arbor via sealed ball bearings, eliminating drive belt slippage under heavy ripping loads. The rack-and-pinion fence mechanism rides on hardened steel gear tracks to maintain parallel alignment across 25-inch sheet goods passes without lateral drift.
Stacked Lithium Table Specifications
The advanced 24-volt Stacked Lithium battery platform supplies high current output to slice dense dimensional timbers without motor hesitation. Rack and pinion fence rails adjust smoothly for rapid width setups.
- 24-volt brushless motor delivers 4500 RPM blade speed for smooth crosscuts and rip passes
- Stacked Lithium battery technology increases power output and extends heavy cutting run times
- Rack and pinion fence system maintains parallel alignment across 25-inch rip capacity cuts
- Precision-ground aluminum table surface reduces stock drag during long hardwood passes
- Smart Guard safety assembly includes modular blade guard, anti-kickback pawls, and riving knife
- Steel roll cage construction protects internal mechanical components from rough jobsite impacts
- Onboard storage compartments hold rip fence, miter gauge, push stick, and blade wrenches
Dyno Bench Cell Telemetry
Dynamometer testing with a 24-volt 10.0Ah Stacked Lithium battery confirms 62 amperes peak draw during full-depth rips in 2×8 Southern yellow pine. Free arbor velocity registers 4520 RPM, settling to 4180 RPM under heavy timber feed pressure. Arbor runout measures less than 0.0011 inches total indicator reading at the blade collar face. Motor casing temperature rise clocks at 30 degrees Fahrenheit across twenty continuous rip cuts. Sound pressure output hits 91 dBA under load.
Field Service Rules Limitations
This cordless table saw demands high-output Stacked Lithium batteries to sustain heavy commercial framing duty without mid-cut power cutouts. Woodworkers should not drop heavy rough-sawn framing timbers onto the extended fence rails to prevent bending the rack gears. Avoid operating without checking riving knife alignment against the blade kerf.
- Clean sawdust from rack and pinion fence gears using dry compressed shop air weekly.
- Wipe aluminum table surface with dry paste wax to reduce workpiece friction and prevent oxidation.
- Inspect anti-kickback pawl points for sharpness and clear trapped wood chips from the pivot pins.
- Check arbor lock nut torque with supplied wrenches before beginning daily ripping operations.
- Recharge 24-volt Stacked Lithium batteries before storage to protect internal pouch cell chemistry.
Warranty Parameters In-Box Hardware
FLEX backs this cordless table saw with a 5-Year limited warranty upon registration covering the tool and battery system. The kit includes the 10-inch table saw, one 24-volt 10.0Ah Stacked Lithium battery, 280-watt rapid charger, 10-inch carbide blade, rip fence, miter gauge, push stick, riving knife, and manual.