Description
Standard bench grinders lack belt length, causing severe friction heat that anneals expensive custom knife blanks and fabrication brackets. The Ellis Belt Grinder Model 6000 supplies sixty inches of abrasive travel for cool rapid stock removal across diverse metals. This one-horsepower industrial machine features a two-and-one-half-inch wide belt running at thirty-six-hundred RPM. Pushing flame-cut torch edges into unbacked belt spans cuts the abrasive backing.
An industrial capacitor-start induction motor connects directly to the belt drive drum, eliminating belt slippage and power transmission losses. Oversized double-sealed ball bearings support the ground steel drive shafts inside ductile iron pillow blocks, preventing shaft deflection under heavy belt tension. The heavy platen bed is cast from high-density ductile iron, precision-ground flat to provide a true reference plane. Sintered bronze guide bushings support the tracking lead screw to ensure belt tracking stability.
Heavy Belt Grinder Matrix
A sixty-inch belt length dissipates grinding heat across extended abrasive surface area to preserve metal hardness during shaping. The contact wheel and flat platen provide multiple reference surfaces for beveling and contouring.
- One-horsepower commercial motor delivers continuous rotational torque across demanding metal fabrication shifts
- Two-and-one-half-inch by sixty-inch belt dimensions provide extended abrasive travel to prevent thermal workpiece distortion
- Precision-ground steel platen supports cutting edges flat against abrasive belts for razor-straight bevel geometry
- Serrated rubber contact wheel enables aggressive metal removal and hollow grinding on tool steel components
- Single-handle quick-release lever enables abrasive belt swaps in under thirty seconds without tracking loss
- Heavy cast iron base dampens rotational harmonics to eliminate machine walk on industrial workbenches
- Rotary spark deflector directs burning metal swarf into containment trays to protect shop technicians
Grinder Dynamics Bench Telemetry
Testing registers a constant belt surface speed of 5,200 surface feet per minute under a continuous fifteen-pound steel plate drag load. Dynamic pneumatic comparison matches a heavy industrial air sander consuming 26.0 CFM at 90 PSI dynamic through three-quarter-inch lines. Sound pressure meters record 80 dBA at operator ear level during aggressive structural deburring passes. Motor stator temperatures climb thirty degrees Fahrenheit above ambient across two hours of nonstop metal fabrication. Drive spindle torque generates 3.6 foot-pounds of continuous rotational resistance.
Fleet Service Practical Directives
Never grind wood, plastic, or composite materials on this metal grinder without cleaning the collection tray. Wood shavings sucked into the internal chamber ignite when steel grinding sparks hit the debris bed. Running belts without checking tracking alignment causes belt edges to scour the internal steel guard housing.
- Empty the slide-out steel spark collector drawer before starting every structural metal deburring shift.
- Blow dry compressed air through motor cooling grilles to clear conductive metal grinding dust weekly.
- Verify belt tracking alignment by rotating the drive drum by hand before switching on electrical power.
Warranty Statement Package Inventory
Ellis covers this industrial belt grinder with a 1-Year limited warranty against mechanical defects and electrical motor failure. The commercial shipment contains one 6000 belt grinder, abrasive belt, spark guard, work rest, and technical manual.
