Description
Trailing cords trip laborers and blade flutter causes chipped veneers when sizing pre-finished panels with standard circular saws. The DEWALT 6 1/2 Inch Corded heavy-duty tracksaw and 59-inch track bundle delivers straight splinter-free panel division via a twelve-amp motor. The fifty-nine-inch aluminum track limits cut length on eight-foot panels, requiring rail connector bars for long passes.
A twelve-amp motor mounts inside a rigid aluminum transmission case, driving the 20 mm arbor spindle through precision helical gears that minimize rotational backlash. Dual anti-kickback pawls engage the track guide grooves to prevent rearward tool climb during deep plunge cuts. The parallel plunge mechanism pivots on ground steel pins, maintaining blade perpendicularity across variable depth settings while an anti-splinter edge strip holds veneer fibers flat.
Corded Track Saw Hardware Specifications
Cabinetmakers dividing high-gloss laminates demand dead-straight score lines without edge chipping along the cut path. Zero-clearance guide tracks establish true blade kerf placement on both sides of the cut.
- 12-amp electric motor delivers variable speeds from 1750 to 4000 RPM for clean cuts in woods and plastics
- 59-inch extruded aluminum guide track delivers dead-straight cuts across four-foot sheet goods
- Zero-clearance track edge strip holds delicate face veneers flat to prevent surface chip-out
- Continuous anti-kickback mechanism prevents the saw from riding backward along the guide rail
- Parallel plunge linkage maintains natural hand positioning throughout plunge and cutting strokes
- Low-profile flat blade guard permits flush wall trimming as close as 5/8-inch from vertical corners
- Direct dust port channels airborne wood particulates into shop vacuum extraction hoses
Bench Load Telemetry Amperage Draw
The motor pulls 4.2 amps at idle running at maximum 4000 RPM on standard 120-volt lines. Plunging through three-quarter industrial melamine sheets elevates current draw to 11.6 amps while motor velocity holds at 3650 RPM. Track guide straightness checks register under 0.001 inches across fifty-nine inches of travel. Operating sound emissions peak at 85 dBA under high-feed panel sizing loads.
Field Service Trade-Offs Application Filter
Do not use this track saw for rough timber framing or demolition cutting through concrete-embedded lumber. Inexperienced operators who force the plunge head downward before full motor RPM chip carbide teeth on dense composite cores. Wipe aluminum track sliding channels with a clean dry microfiber towel before setting the saw carriage. Replace the rubber splinter guard strip when changing blade kerf widths. Store tracks flat inside protective cases.
Warranty Protection Standard Package Items
A 3-Year limited warranty includes one year of free service and ninety days money back. The bundle contains the 6-1/2-inch track saw, 59-inch aluminum guide track, 48-tooth carbide track saw blade, blade wrench, and heavy-duty T-LOC storage case.
