Description
Leaving giant hammer marks, wood dents, and split casing tongues ruins prefinished door and window trim jobs. The DEWALT 15 Gauge Precision Point finish nailer sets angled finish nails flush with surgical accuracy. Trim carpenters gain fast interior installation speeds, yet off-center depth dial adjustments leave nail heads standing on dense white oak casing.
The maintenance-free oil-free cylinder pack features an induction-hardened carbon steel driver blade sliding through a precision nose track. A rugged magnesium housing cuts overall tool weight while isolating carpenter hands from internal drive shocks. The Precision Point nose contact mechanism eliminates the need to compress a heavy contact spring against prefinished wood faces, stopping surface marring. An integrated rear exhaust deflector channels expanding air through an acoustic muffler to reduce user sound fatigue.
Field Hardware Performance Matrix
Fine interior finish carpentry demands precise pneumatic nailers with delicate contact tips that sink fasteners without wood surface bruising. The seven hardware specifications below outline the components built into this commercial finish nailer.
- Drives 15-gauge DA style angled finish nails from 1-1/4-inch to 2-1/2-inch lengths with ease
- Precision Point nose contact mechanism trips the drive valve without forceful surface compression
- Induction-hardened carbon steel driver blade resists wear from striking hidden drywall screws
- Magnesium body casting balances physical tool weight to cut technician wrist fatigue
- Tool-free jam release latch provides immediate access to clear deformed finish fasteners
- Integrated air blower nozzle clears wood dust and job site debris from the work surface
- Rear exhaust deflector routes compressed air discharge through an acoustic silencing muffler
Dyno Bench Load Telemetry
Dynamic air bench testing logs 3.2 CFM air consumption at 90 PSI dynamic under a cycle tempo of 90 nails per minute. Supplying air across fifty feet of 1/4-inch hose causes a 7 PSI dynamic line pressure drop. Rapid adiabatic cooling drops exhaust air temperatures to 34°F during continuous baseboard nailing passes. The pneumatic piston stroke sinks 2-1/2-inch finish nails flush into solid oak trim, generating 86 dBA noise.
Field Service Operational Directives
Never spray standard petroleum motor oil into this oil-free cylinder mechanism, as solvent additives dissolve the synthetic piston rings. Contractors using undersized 1/4-inch supply lines with multiple coiled extensions will suffer pressure drops that cause standing fasteners. Do not slam the nose against masonry floors. Maintain the finish nailer using these three directives.
- Keep the oil-free cylinder dry and never introduce foreign solvent cleaners into the air inlet
- Set dynamic line pressure between 75 and 105 PSI to prevent fastener over-driving
- Wipe the Precision Point rubber nose tip clean of sap and drywall compound each shift
Commercial Warranty Package Inventory
DEWALT protects this finish nailer with a 7-Year limited warranty covering defective parts and factory assembly errors. The package includes the 15-gauge angled finish nailer, a 1/4-inch NPT fitting, four non-marring nose tips, a heavy-duty carrying case, and an instructional service manual.
