Description
Hot abrasive spark showers and ragged slag burrs create severe fire hazards and slow down structural pipe welding. The DEWALT 14in Multi Cutter Saw produces clean cold cuts through steel channel and pipe via a fifteen-amp motor. Carbide cermet blades cost four times more than abrasive discs, punishing operators who force downfeed cuts too fast.
A fifteen-amp electric motor delivers high torque through heat-treated alloy steel gearing housed in a rigid cast aluminum gear case. The one-inch arbor turns inside sealed ball bearings that resist fine iron swarf intrusion. A quick-clamping manual screw vise clamps structural steel shapes without slippage during heavy cutting loads, while a stamped steel base resists deformation under high mechanical feed leverage.
Cold Metal Chop Saw Parameters
Structural metal fabrication shops demand dead-square cuts across steel tubing and pipe without hazardous spark plumes. Low-speed high-torque cold cutting preserves metal temper without creating heat-affected zones.
- 15-amp electric motor spins 14-inch cermet blades at 1300 RPM for burr-free cold metal sectioning
- 14-inch cermet-tipped blade slices five-inch steel pipe and 4-1/2-inch angle iron without sparks
- Tool-less fence adjusts up to forty-five degrees to execute fast miter cuts on structural tubing
- Quick-lock manual vise clamps structural stock tight and features an adjustable angle guide
- Heavy-duty cast aluminum base plate provides flat cutting support across uneven shop floors
- Spindle lock button holds the drive arbor stationary for rapid blade swaps using a single hex tool
- Retractable lower blade guard deflects hot metal shavings into an integrated chip containment chute
Bench Load Telemetry Amperage Draw
Motor draw settles at 5.2 amps during free-spin operation on standard 120-volt utility circuits. Slicing through four-inch schedule 40 structural steel pipe brings current draw to 14.8 amps while maintaining steady blade momentum. Workpiece edge temperatures remain under 125 degrees Fahrenheit, allowing immediate hand contact without heat gloves. Sound output reaches 89 dBA under load, requiring operator hearing protection.
Field Service Trade-Offs Application Filter
Do not use this cold chop saw for slicing masonry brick, concrete board, or wood timbers with embedded dirt. Inexperienced operators who slam the plunge handle down chip brittle cermet blade teeth on solid steel bar. Empty the swarf collection tray after every six cuts to prevent hot chip backup into the lower guard. Inspect carbon motor brushes every sixty operating hours for uniform contact wear. Blow metal filings out of the motor vents with dry shop air.
Warranty Protection Standard Package Items
A 3-Year limited warranty covers mechanical gear parts and motor windings under commercial use. The package includes the 14-inch multi-cutter saw, 70-tooth cermet-tipped blade, socket wrench, vertical clamp, and operating instructions.
