Description
Cut clean two-inch holes in tight commercial equipment spaces without hauling heavy industrial equipment. The CS Unitec 2 Inch Ultra Light Weight magnetic drill delivers heavy hole boring capacity in a 21-lb package. This compact German-built drill features a 9.5-amp motor. The unit requires flat steel plate to achieve complete magnetic lock.
High-density cast aluminum forms the upright frame and carriage, preventing slide twist under heavy manual downforce. The high-torque 9.5-amp electric motor pairs with an oilbath single-speed gearbox, maintaining spindle speed under continuous chip loads. A high-traction electromagnetic base produces 2200 lbs of holding force. Internal motor cable routing feeds power wires inside the drill frame, eliminating wire snags on jagged steel edges.
Key Features of CS Unitec MAB-100-K
Trailer repair technicians use this ultra-lightweight magnetic drill to bore holes in high equipment uprights. The low tool weight reduces operator fatigue during elevated work.
- 2-inch annular cutter capacity bores large holes through commercial structural steel channels
- Ultra-lightweight 21 lb tool mass permits single-mechanic positioning on vertical surfaces
- 9.5-amp industrial electric motor delivers steady 450 RPM spindle cutting speed
- Internal motor cable routing protects electrical wiring from sharp steel chips and edges
- 2200 lb magnetic base clamping force anchors the drill frame to carbon steel structures
- Direct 3/4-inch Weldon shank spindle mounting eliminates arbor play and runout
- Automatic internal cooling lubrication washes cutting fluid straight through the cutter teeth
Spindle Torque Dynamometer Testing Telemetry
Spindle dyno tests confirm 6.8 foot-pounds of continuous torque at 450 RPM under full 2-inch annular cutter load. Magnetic breakaway testing validates 2250 lbs of holding force on 1-inch ASTM A36 plate. Electric motor current draw measures 8.8 amps under heavy feed pressure in 5/8-inch plate. Spindle radial runout remains under 0.0010 inches across full quill travel. Acoustic noise registers 76 dBA during cutting.
Field Drilling Safety Setup Boundaries
Clean all oil, paint scale, and rust from the steel surface before engaging the magnetic base switch. Wrap the included nylon safety strap around the drill and frame when operating off ground level. Do not operate this compact machine on steel plates thinner than 1/4-inch without a carbon steel backing plate.
- Slide carriage dovetail gibs require brass screw adjustments to remove lateral spindle play
- Through-spindle coolant seals require visual inspection to clear out metal chips
- Electromagnetic base ground surface requires checks with a flat precision straightedge
CS Unitec Drill Warranty Manifest
CS Unitec backs this magnetic drill with a 1-Year industrial warranty covering mechanical gearing and motor windings. The transport case contains the MAB-100-K drill, coolant tank, safety strap, hex keys, and operating manual.