Description
Stiff 2-inch commercial suction and discharge hoses break technician stamina when coiled by hand on service truck beds. The Coxreels Motorized Hose Reel 2in unit spools 50 feet of 2-inch hose using a 1/2 HP electric motor. Rated at 1000 PSI, it clears heavy transfer lines. Motor brushes burn out if operated under low voltage.
Coxreels builds this heavy compact chassis from thick cold-rolled steel plate with solid steel tie rods to prevent drum crushing under line tension. The fluid circuit utilizes an unchoked 2-inch NPT machined steel swivel with fluorocarbon packings to handle 1000 PSI bulk water or fuel delivery without volume loss. A 1/2 HP 12-Volt DC electric motor connects to the drum shaft through a heavy roller chain and sprocket reduction drive. Sealed pillow block bearings support the drum axle.
Field Hardware Performance Matrix
Mobile water transfer trucks and fleet fueling skids require motorized large-diameter hose storage in a compact chassis format. Heavy welded steel frames and high-flow 2-inch steel swivels maintain high-speed fluid transfer without sacrificing vehicle bed space.
- 1/2 HP 12-Volt DC electric motor delivers high-torque mechanical line retrieval for 50 feet of heavy 2-inch hose.
- 1000 PSI maximum operating pressure rating accommodates commercial bulk fuel, water, and slurry transfer.
- 2-inch inner diameter full-flow machined steel swivel routes massive fluid volumes without pressure drops.
- Heavy-gauge all-steel A-frame chassis resists structural bending under 250 pounds of charged hose weight.
- Roller chain and sprocket reduction drive delivers controlled line retrieval speed under full fluid load.
- Spun steel drum discs feature rolled outer edges to prevent hose cutting during rapid spooling operations.
- Push-button momentary switch controls motor engagement without manual operator hand cranking.
Dyno Load Realities Heat Data
Bench dyno testing with 50 feet of charged 2-inch fluid hose shows the 1/2 HP motor pulling 30 Amps under line retrieval load. Motor casing temperature climbs to 146°F after 4 consecutive full-length line retrievals in an 85°F shop environment. Pumping fluid at 150 GPM produces less than 1.8 PSI pressure drop through the 2-inch steel swivel core. Roller chain deflection measures 0.25 inches under full spool load. Line retrieval speed clocks in at 3.8 feet per second under full battery supply.
Field Service Application Limits
Weighing 98 pounds bare, installing this heavy-duty reel on service truck decks requires hoists and four 1/2-inch grade 8 bolts. Do not use this reel for high-pressure grease dispensing or hydraulic circuits exceeding 1000 PSI. Pressures above 1000 PSI deform the 2-inch swivel seals, causing dangerous fluid blowouts in equipment bays.
- Lubricate the motor drive chain with dry graphite spray every 100 operating hours to stop link galling.
- Inspect the 2-inch fluid swivel seals for chemical weeping every 250 hours of bulk transfer duty.
- Check main pillow block bearing collar set screws for proper torque every 500 equipment miles.
Commercial Warranty Package Inventory
Coxreels provides a 2-Year commercial warranty against defects in materials and factory workmanship on frame, swivel, and motor components. The shipment crate contains the bare 1195-932-EDV3 reel, an installed 1/2 HP 12-Volt motor with chain guard, a 2-inch steel swivel, and an illustrated technical instruction manual.